OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

325541009-00

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21
MS5541-30C
Miniature 14 bar Module
SENSOR SOLUTIONS ///MS5541C
09/2015
Page 19
DEVICE PACKAGE OUTLINES
Fig. 8: Device package outlines of MS5541-C
MS5541-30C
Miniature 14 bar Module
SENSOR SOLUTIONS ///MS5541C
09/2015
Page 20
ASSEMBLY
MECHANICAL STRESS
It is recommended to avoid mechanical stress on the PCB on which the sensor is mounted. The thickness of the
PCB should not be below 1.6 mm. A thicker PCB is stiffer creating less stress on the soldering contacts. For
applications where mechanical stress cannot be avoided (for example ultrasound welding of the case or thin PCB’s
in watches) please fix the sensor with drops of low stress epoxy (for example Hysol FP-4401).
MOUNTING
The MS5541C can be placed with automatic Pick&Place equipment using vacuum nozzles. It will not be damaged
by the vacuum. Due to the low stress assembly the sensor does not show pressure hysteresis effects.
Special care has to be taken to not touch the protective gel of the sensor during the assembly.
The MS5541C can be mounted with the cap down or the cap looking upwards. In both cases it is important to solder
all contact pads. The Pins PEN and PV shall be left open or connected to V
DD
. Do not connect the Pins PEN and
PV to GND!
SEALING WITH O-RING
In products like outdoor watches the electronics must be protected against direct water or humidity. For those
products the MS5541-CM provides the possibility to seal with an O-ring. The protective cap of the MS5541CM is
made of special anticorrosive stainless steel with a polished surface. In addition to this the MS5541CM is filled with
silicone gel covering the sensor and the bonding wires. The O-ring (or O-rings) shall be placed at the outer diameter
of the metal cap. This method avoids mechanical stress because the sensor can move in vertical direction.
CLEANING
The MS5541C has been manufactured under cleanroom conditions. Each device has been inspected for the
homogeneity and the cleanness of the silicone gel. It is therefore recommended to assemble the sensor under class
10’000 or better conditions. Should this not be possible, it is recommended to protect the sensor opening during
assembly from entering particles and dust. To avoid cleaning of the PCB, solder paste of type “no-clean” shall be
used. Cleaning might damage the sensor!
ESD PRECAUTIONS
The electrical contact pads are protected against ESD up to 4 kV HBM (human body model). It is therefore essential
to ground machines and personal properly during assembly and handling of the device. The MS5541C is shipped
in antistatic transport boxes. Any test adapters or production transport boxes used during the assembly of the sensor
shall be of an equivalent antistatic material.
MS5541-30C
Miniature 14 bar Module
SENSOR SOLUTIONS ///MS5541C
09/2015
Page 21
ORDERING INFORMATION
Part Number / Art. Number
Product
Delivery Form
325541009-00
MS5541C Miniature 14 bar Module White gel
Tube
325541009-50
MS5541C Miniature 14 bar Module White gel T&R
Tape& reel TOP-UP
325541008-00
MS5541C Miniature 14 bar Module Transparent gel
Tube
325541008-50
MS5541C Miniature 14 bar Module Transparent gel T&R
Tape& reel TOP-UP
325541021-00
MS5541C Miniature 14 bar Module Transparent gel HE
Tube
325541021-50
MS5541C Miniature 14 bar Module Transparent gel HE T&R
Tape& reel TOP-UP
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
DA5541C_009
0005541C1194 ECN2178
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
45738 Northport Loop West
Fremont, CA 94538
Tel: +1 800 767 1888
Fax: +1 510 498 1578
e-mail: pfg.cs.amer@meas-spec.com
Website: www.meas-spec.com
EUROPE
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
Switzerland Sàrl
Ch. Chapons-des-Prés 11
CH-2022 Bevaix
Tel: +41 32 847 9550
Fax: + 41 32 847 9569
e-mail: sales.ch@meas-spec.com
Website: www.meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North) Nanshan
District, Shenzhen, 518057 China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
e-mail: pfg.cs.asia@meas-spec.com
Website: www.meas-spec.com
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21

325541009-00

Mfr. #:
Buy 325541009-00
Manufacturer:
TE Connectivity / Measurement Specialties
Description:
Board Mount Pressure Sensors BAROMETER MOD,14BAR, WH GEL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet