Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
February 2011
February 2011
www.acriche.com
www.acriche.com
서식번호 : SSC-QP-7-07-25 (Rev.00)
17
Precaution for use
[1] Acriche series run on high voltage such as 110 V or 220 V.
[2] Please don't touch the PCB surface, which has built-in terminals and chips,
with your hands or metals, while Acriche series is running.
[3] Please don't add or change wires,while Acriche series is running.
[4] LED ASS’Y should be attached to customer product properly and be careful twist
or bend when it is assembled.
[5] LED ASS’Y should be kept from mechanical or electrical shock cause physical
damage to the module.
[6] Do not disassemble the module.
[7] During processing, mechanical stress on the surface should be minimized as
much as possible. Sharp object of all types should not be used to pierce the LED
resin.
ESD protection
(1) Ionizer, earthing and keeping appropriate humidity are necessary for work
environment.
(2) Anti-static glove and grounded band must be used.
Storage
(1) Do not leave the module in high temperature and humidity conditions. Normal
condition is recommended to store the moudule.
( 0°C ≤
Ta ≤
70°C , relative humidity ≤
70% )
(2) Keep the module out of the direct rays of the sun.
Operation
The module should be operated under the given forward voltage.
When the module is operated in the excessive voltage or current conditions, the LEDs
mounted on the PCB could be burned out.
