MP8352 – 3V to 6V INPUT, 6A, 600KHz STEP-DOWN WITH SYNCHRONOUS GATE DRIVER
MP8352 Rev. 1.0 www.MonolithicPower.com 2
3/11/2010 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number* Package Top Marking Free Air Temperature (T
A
)
MP8352DL 3x4 QFN14 8352
–40°C to +85°C
* For Tape & Reel, add suffix –Z (eg. MP8352DL–Z).
For RoHS compliant packaging, add suffix –LF (eg. MP8352DL–LF–Z)
PACKAGE REFERENCE
TOP VIEW
FB
PG
EN/SYNC
IN
IN
IN
N/C
1
2
3
4
5
6
7
GND
BG
VCC
BST
SW
SW
SW
14
13
12
11
10
9
8
EXPOSED PAD
ON BACKSIDE
ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage V
IN
...................................... 6.5V
V
SW
....................... -0.3V(-5V for < 10ns) to 7.5V
V
BS
-V
SW
.......................................................... 6V
All Other Pins.................................–0.3V to +6V
Continuous Power Dissipation (T
A
= +25°C)
(2)
………………………………………………....2.6W
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature.............. –65°C to +150°C
Recommended Operating Conditions
(3)
Supply Voltage V
IN
Vcc .......................3V to 6V
Operating Junct. Temp (T
J
)..... –40°C to +125°C
Thermal Resistance
(4)
θ
JA
θ
JC
3x4 QFN14..............................48.......11.... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J (MAX)
, the junction-to-ambient
thermal resistance
JA
, and the ambient temperature T
A
. The
maximum allowable continuous power dissipation at any
ambient temperature is calculated by P
D (MAX)
= (T
J
(MAX)
-T
A
)/
JA
.
Exceeding the maximum allowable power dissipation will cause
excessive die temperature, and the regulator will go into
thermal shutdown. Internal thermal shutdown circuitry protects
the device from permanent damage.
3) The device is not guaranteed to function outside of its operating
conditions.
4) Measured on JESD51-7, 4-layer PCB.
