VS-ST700CL Series
www.vishay.com
Vishay Semiconductors
Revision: 22-Dec-15
3
Document Number: 94413
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• The table above shows the increment of thermal resistance R
thJ-hs
when devices operate at different conduction angles than DC
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS
VALUES
UNITS
Typ. Max.
Maximum peak gate power P
GM
T
J
= T
J
maximum, t
p
5 ms 10.0
W
Maximum average gate power P
G(AV)
T
J
= T
J
maximum, f = 50 Hz, d% = 50 2.0
Maximum peak positive gate current I
GM
T
J
= T
J
maximum, t
p
5 ms 3.0 A
Maximum peak positive gate voltage +V
GM
T
J
= T
J
maximum, t
p
5 ms
20
V
Maximum peak negative gate voltage -V
GM
5.0
DC gate current required to trigger I
GT
T
J
= -40 °C
Maximum required gate
trigger/
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
200 -
mAT
J
= 25 °C 100 200
T
J
= 125 °C 50 -
DC gate voltage required to trigger V
GT
T
J
= -40 °C 2.5 -
VT
J
= 25 °C 1.8 3.0
T
J
= 125 °C 1.1 -
DC gate current not to trigger I
GD
T
J
= T
J
maximum
Maximum gate current/voltage
not to trigger is the maximum
value which will not trigger any
unit with rated V
DRM
anode to
cathode applied
10 mA
DC gate voltage not to trigger V
GD
0.25 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating junction temperature range T
J
-40 to 125
°C
Maximum storage temperature range T
Stg
-40 to 150
Maximum thermal resistance, junction to heatsink R
thJ-hs
DC operation single side cooled 0.073
K/W
DC operation double side cooled 0.031
Maximum thermal resistance, case to heatsink R
thC-hs
DC operation single side cooled 0.011
DC operation double side cooled 0.006
Mounting force, ± 10 %
14 700
(1500)
N
(kg)
Approximate weight 255 g
Case style See dimensions - link at the end of datasheet TO-200AC (B-PUK)
R
thJ-hs
CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.009 0.009 0.006 0.006
T
J
= T
J
maximum K/W
120° 0.011 0.011 0.011 0.011
90° 0.014 0.014 0.015 0.015
60° 0.020 0.020 0.021 0.021
30° 0.036 0.036 0.036 0.036