LH1510AAB, LH1510AABTR, LH1510AT
www.vishay.com
Vishay Semiconductors
Rev. 1.7, 25-Jul-11
1
Document Number: 83810
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 Form A Solid-State Relay
DESCRIPTION
The LH1510 is an SPST normally open switch (1 form A) that
can replace electromechanical relays in many applications.
The relay is constructed using a GaAlAs LED for actuation
control and an integrated monolithic die for the switch
output. The die, fabricated in a high-voltage dielectrically
isolated technology, is comprised of a photodiode array,
switch control circuity, and MOSFET switches. In addition,
the relay employs current-limiting circuity enabling it to pass
lightning surge testing as per ANSI/TIA-968-B and other
regulatory voltage surge requirements when overvoltage
protection is provided. The LH1510 is the only relay in the
family that provides current limiting for unidirectional DC
applications.
FEATURES
• Isolation test voltage 5300 V
RMS
• Current limit protection built in
• High reliability monolithic output die
• Low power consumption
• Clean bounce free switching
• High surge capability
• Surface mountable
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• General telecom switching
• Instrumentation
• Industrial controls
i179041-2
DIP
SMD
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double protection
CSA: certification no. 093751
BSI: certification no. 7979/7980
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
FIMKO: 25419
ORDERING INFORMATION
LH1510###TR
PART NUMBER ELECTR.
VARIATION
PACKAGE
CONFIG.
TAPE AND
REEL
PACKAGE UL, CSA, BSI, FIMKO
SMD-6, tubes LH1510AAB
SMD-6, tape and reel LH1510AABTR
DIP-6, tubes LH1510AT
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
LED continuous forward current I
F
50 mA
LED reverse voltage I
R
10 μA V
R
8V
OUTPUT
DC or peak AC load voltage I
L
50 μA V
L
200 V
Continuous DC load current - bidirectional
operation
I
L
200 mA
Continuous DC load current - unidirectional
operation
I
L
350 mA
Peak load current (single shot) t = 100 ms I
P
(1)
> 0.1 mm
7.62 mm
DIP
SMD