HMC361S8G Datasheet HMC361S8GE, HMC361S8G, HMC361S8GTR | P4-P6

For price, delivery and to place orders: Analog Devices, Inc., One Technology Way, Norwood, MA 02062

978-250-3343 tel • 978-250-3373 fax • Order online at www.analog.com/hittitemw

Application support: Phone: 978-250-3343 or RFMG-apps@analog.com

FREQUENCY DIVIDERS & DETECTORS - SMT

4 - 3

Output Voltage Waveform,

Pin = 0 dBm, Fout = 882 MHz, T = 25 °C

Absolute Maximum Ratings

Outline Drawing

Typical Supply Current vs. Vcc

Note: Divider will operate over full voltage range shown above

RF input (Vcc = +5V) +13 dBm

Vcc +5.5V

VLogic Vcc -1.6V to Vcc -1.2V

Junction temperature (T

) 135 °C

Continuous Pdiss (T = 85 °C)

(derate 15.9 mW/°C above 85 °C)

0.79 W

Thermal resistance (R

)

(junction to ground paddle)

63 °C/W

Storage temperature -65 °C to +150 °C

Operating temperature -40 °C to +85 °C

Vcc (V) Icc (mA)

4.75 74

5.0 83

5.25 89

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

Part Number Package Body Material Lead Finish MSL Rating Package Marking

[3]

HMC361S8G Low stress injection molded plastic Sn/Pb solder

MSL1

[1]

H361

XXXX

HMC361S8GE RoHS-compliant low stress injection molded plastic 100% matte Sn

MSL1

[2]

H361

XXXX

[1] Max peak reow temperature of 235 °C

[2] Max peak reow temperature of 260 °C

[3] 4-digit lot number XXXX

Package Information

HMC361S8G / 361S8GE

SMT GaAs HBT MMIC

DIVIDE-BY-2, DC - 10 GHz

v07.1114

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS].

3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE.

4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE.

5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO

PCB RF GROUND.

-500

-300

-100

100

300

500

22.7 23.1 23.5 23.9 24.3 24.7

AMPLITUDE (mV)

TIME (nS)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Analog Devices, Inc., One Technology Way, Norwood, MA 02062

978-250-3343 tel • 978-250-3373 fax • Order online at www.analog.com/hittitemw

Application support: Phone: 978-250-3343 or RFMG-apps@analog.com

FREQUENCY DIVIDERS & DETECTORS - SMT

4 - 4

Pin Description

Pin Number Function Description Interface Schematic

1 OUT

Divided output 180° out of phase with pin 3

and must be DC blocked

2, 6 N/C N/C or ground

3 OUT Divided output, DC block required

4 VCC Supply voltage 5V ± 0.25V.

5 IN RF input must be DC blocked.

7 IN

RF input 180° out of phase with pin 5, DC block required for

differential operation or A/C ground for single ended applications

8 GND

Ground backside of package has exposed metal ground slug

which must be connected to ground.

HMC361S8G / 361S8GE

SMT GaAs HBT MMIC

DIVIDE-BY-2, DC - 10 GHz

v07.1114

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Analog Devices, Inc., One Technology Way, Norwood, MA 02062

978-250-3343 tel • 978-250-3373 fax • Order online at www.analog.com/hittitemw

Application support: Phone: 978-250-3343 or RFMG-apps@analog.com

FREQUENCY DIVIDERS & DETECTORS - SMT

4 - 5

The circuit board used in the application should use

RF circuit design techniques. Signal lines should

have 50 Ω impedance while the package ground

leads and backside ground slug should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation circuit board shown is available

from Hittite upon request. This evaluation board is

designed for single ended input testing. J2 and J3

provide differential output signals.

Evaluation PCB

List of Materials for Evaluation PCB 104631

[1]

Item Description

J1 - J3 PCB mount SMA RF connector

C1 - C4 100 pF capacitor, 0402 pkg.

C5 1000 pF capacitor, 0603 pkg.

C6 10 µF tantalum capacitor

U1 HMC361S8G / HMC361S8GE divide-by-2

PCB

[2]

104627 eval board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit board material: Rogers 4350

HMC361S8G / 361S8GE

SMT GaAs HBT MMIC

DIVIDE-BY-2, DC - 10 GHz

v07.1114

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

P1-P3 P4-P6 P7-P7

HMC361S8G

Mfr. #:

Buy HMC361S8G

Manufacturer:

Analog Devices / Hittite

Description:

Prescaler InGaP HBT Divide-by-2 SMT, DC - 10 GHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HMC361S8G

HMC361S8G

Products related to this Datasheet