CRS2512-FX-10R0ELF

Sn PLATING
OVERCOAT
CERAMIC SUBSTRATE
RESISTIVE ELEMENT
Ni PLATING
CONDUCTOR (Lead Free)
Features
n Anti-surge
n Wide resistance range
n RoHS compliant*
Applications
n Pulse power applications
n High voltage applications
n Consumer electronics
n Telecommunications
n Power supplies
CRS Series - High Power Anti-Surge Chip Resistor
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
*RoHS COMPLIANT
LEAD FREE
*RoHS COMPLIANT
VERSIONS
AVAILABLE
LEAD FREE
VERSIONS ARE
RoHS COMPLIANT*
DIMENSIONS:
MM
(INCHES)
Electrical Characteristics
Recommended Solder Pad Layout
Construction
Performance Characteristics
Test Conditions Specication
Short Time Overload
2 times rated voltage or maximum
ΔR ≤±(2 % + 0.1 Ω)
overload voltage for 5 seconds.
Solderability 245 ±5 °C for 3 ±0.5 seconds. Over 95 % coverage
Resistance to
260 ±5 °C for 10 ± 1 seconds. ΔR ≤±(1 % + 0.1 Ω)
Solder Heat
40 ±2 °C, 90 to 95 %.
Load Life Humidity 1.5 hours ON, 0.5 hours OFF for ΔR ≤±(3 % + 0.1 Ω)
1000 hours at rated power.
70 °C.
Load Life 1.5 hours ON, 0.5 hours OFF for ΔR ≤±(3 % + 0.1 Ω)
1000 hours at rated power.
-55 °C (30 min.), +25 °C (2~3 min.),
Temperature Cycle +155 °C (30 min.), +25 °C (2~3 min.) ΔR ≤±(1 % + 0.05 Ω)
for ve cycles.
DIMENSIONS:
MM
(INCHES)
Model
Dimension
A B L
CRS0805
1.30
(0.051)
1.15
(0.045)
3.50
(0.138)
CRS1206
1.80
(0.071)
1.30
(0.051)
4.70
(0.185)
CRS2010
3.00
(0.118)
1.50
(0.059)
6.80
(0.268)
CRS2512
3.70
(0.146)
2.45
(0.096)
7.60
(0.299)
Characteristic CRS0805 CRS1206 CRS2010 CRS2512
Power Rating @ 70°C 0.25 W 0.5 W 1 W 2 W
Operating Temperature
Range
-55 °C to +155 °C
Maximum Working Voltage 150 V 200 V 200 V 300 V
Maximum Overload Voltage 300 V 400 V 400 V 600 V
Resistance Range /
Temperature Coefcient
1 to 9.9 ohms / ±200 PPM/°C
10 ohms to 1 megohm / ±100 PPM/°C
Tolerance /
Standard Resistance Values
1 % / E96 + E24
5 % / E24
Product Dimensions
Model
Dimension
A B C D T
CRS0805
2.00 ± 0.10
(0.079 ± 0.004)
1.25 ± 0.10
(0.049 ± 0.004)
0.40 ± 0.20
(0.016 ± 0.008)
0.40 ± 0.20
(0.016 ± 0.008)
0.50 ± 0.10
(0.020 ± 0.004)
CRS1206
3.10 ± 0.10
(0.122 ± 0.004)
1.60 ± 0.10
(0.063 ± 0.004)
0.50 ± 0.20
(0.020 ± 0.008)
0.50 ± 0.20
(0.020 ± 0.008)
0.55 ± 0.10
(0.022 ± 0.004)
CRS2010
5.00 ± 0.20
(0.197 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
0.60 ± 0.25
(0.024 ± 0.010)
0.60 ± 0.25
(0.024 ± 0.010)
0.55 ± 0.10
(0.022 ± 0.004)
CRS2512
6.40 ± 0.20
(0.252 ± 0.008)
3.20 ± 0.20
(0.126 ± 0.008)
0.60 ± 0.25
(0.024 ± 0.010)
1.80 ± 0.25
(0.071 ± 0.010)
0.60 ± 0.15
(0.024 ± 0.006)
A
B
T
L
B
D D
C C
A
A
B
T
L
B
D D
C C
A
A
B
T
L
B
D D
C C
A
Ambient Temperature (°C)
70 155
100
-55
Power Ratio (%)
Derating Curve
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CRS Series - High Power Anti-Surge Chip Resistor
Surge Performance
1000
100
10
1
0.0001 0.001 0.01
CRS0805
CRS1206
CRS2010
CRS2512
0.1 1
Surge Duration (seconds)
Peak Power (W)
1
10
100
1000
10000
10
Test Method:1.2/50 µs Waveform
5 Pulses at 12 Second Intervals
100 1000 10000 100000
CRS0805
CRS1206
CRS2010
CRS2512
Resistance (Ohms)
Peak Voltage (Volts)
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CRS Series - High Power Anti-Surge Chip Resistor
SolderingProle
0
50
100
150
200
250
300
010 50 100 150 200 250
Time (seconds)
Temperature (°C)
60 - 120 seconds
10 - 15
seconds
245 °C peak
190 °C
How to Order
CRS 2512 - F X - 24R3 E LF
Model
CRS = Anti-Surge Chip Resistor
Size
0805
1206
2010
2512
Resistance Tolerance
F = ±1 %
J = ±5 %
TCR
X = ±100 PPM/°C
W = ±200 PPM/°C
Resistance Value
1% Tolerance:
<100 ohms ..... “R” represents decimal point (example: 24R3 = 24.3 ohms)
≥100 ohms ...... First three digits are signicant, fourth digit represents number of zeros to follow
(example: 8252 = 82.5K ohms)
5% Tolerance:
<10 ohms ....... “R” represents decimal point (example: 4R7 = 4.7 ohms)
≥10 ohms ........ First two digits are signicant, third digit represents number of zeros to follow
(example: 474 = 470K ohms)
Packaging
E = 5,000 pieces per 7-inch reel (CRS0805, CRS1206)
4,000 pieces per 7-inch reel (CRS2010, CRS2512)
Termination
LF = Tin-plated (RoHS Compliant)

CRS2512-FX-10R0ELF

Mfr. #:
Manufacturer:
Bourns
Description:
Thick Film Resistors - SMD 10ohms 2W 1% TCR100 RES SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union