NKE Series
Isolated Sub-Miniature 1W Single Output DC/DC Converters
KDC_NKE.K07 Page 7 of 7
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2016 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
PACKAGE SPECIFICATIONS (continued)
RECOMMENDED FOOTPRINT DETAILS
TUBE OUTLINE DIMENSIONS
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 260°C for 10 seconds. The pin termination finish
on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both
types in this series are backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs
8 Pin DIP Tube
4 Pin SIP Tube
8 Pin DIP Package
4 Pin SIP Package
2.54 (0.1)
2.54 (0.1)
1.15 (0.0453)
1.00 (0.0394)
0.1 (0.00394)
4 HOLES
Ø
Tube Quantity : 40
Unless otherwise specified all dimensions in mm [inches] ±0.55mm [0.022].
Tube length (8 Pin DIP) : 520mm ± 2mm (20.47).
Tube length (4 Pin SIP) : 525mm ±2mm (20.67).
11.60 (0.457)
12.60 (0.496)
5.00 (0.197)
0.60±0.15 (0.0236±0.006)
5.40 (0.213)
9.3 [0.366]
14.8 [0.583]
4.45 [0.175]
7.7 [0.303]
2.54 [0.100]
2.54 [0.100]
x4 HOLES
Ø
1.15
1.00
[
Ø
0.045
0.039
]
