Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
How to Order PC “Slimline” Panel Controls
REV. 08/14
P C W 1 J - B 2 4 - B A B 1 0 3 L
HOUSING TERMINAL CONFIGURATION
Code
Features A B C D E F G H J K L M N
Rear Mounting Bracket X X X X
Side Mounting Bracket X X X X
Axial Terminals .100 ” (2.54 mm) Centers X X X
Radial Terminals .100 ” (2.54 mm) Centers X X X
Radial Terminals .200 ” (5.08 mm) Centers X X X
Solder Lugs .200” (5.08 mm) Centers X
Axial Terminals .200 ” (5.08 mm) Centers X X X
Hardware Included X X X X X X X X X
Available Shaft
Code Description Styles
W 9 mm x .250 ” (6.35 mm) Length All
Threaded M9 x 0.75 6g 5 Pl
L 9 mm x .375 ” (9.53 mm) Length B, C, R
Threaded M9 x 0.75 6g 5 Pl
BUSHING CONFIGURATION
Available Shaft
Code Description Styles
16 1/2 ” (12.7 mm) Length B
20 5/8 ” (15.9 mm) Length J
24 3/4 ” (19 mm) Length B, C, J, Y
28 7/8 ” (22.2 mm) Length B, C, J, Y
32 1 ” (25.4 mm) Length B, C, J, Y
36 1-1/8 ” (28.6 mm) Length B, C, J, Y
Metric
19 19 mm Length R
22 22 mm Length R
24 24 mm Length R
SHAFT LENGTH (FMS)
1 Single
NO. SECTIONS
Code Description
J 9:00 Position
D None
ANTI-ROTATION LUG
Code TR
501 500 Ω
102 1 KΩ
252 2.5 KΩ
502 5 KΩ
RESISTANCE VALUES
Code Description
B 1/4 ” (6.35 mm) Dia. Slotted
C 1/4 ” (6.35 mm) Dia. Flatted
J 3/16 ” (4.76 mm) Dia. Flatted
R 6 mm Dia. Slotted
(Use Metric Lengths Only)
Y 3/16 ” (4.76 mm) Dia. Split Shaft
SHAFT STYLES (See Outline Drawing)
Code TR
103 10 KΩ
203 20 KΩ
253 25 KΩ
503 50 KΩ
Code TR
104 100 KΩ
254 250 KΩ
504 500 KΩ
105 1 MΩ
Code Taper Description
B Lin. CP ±20 %
D CW Audio CP ±20 %
G CCW Audio CP ±20 %
ELEMENT TAPER VERSIONS
Code Taper Description
A No Detents
B 10 Detents
C Center Detent Only
D 20 Detents
E 30 Detents
F CCW Detent Only
DETENT CONFIGURATIONS
RoHS IDENTIFIER
Description
Compliant
Code
L
Panel mount hardware not included as standard on bracketed versions.
The sample part number demonstrates the identification code for Bourns
Slimline Potentiometers. The part number shown is a commonly used model,
typically available from stock.
Boldface features are Bourns standard options. All others are available with
higher minimum order quantities.
