PCW1J-C24-BEB253L Datasheet PCW1J-B24-AEB103L, PCW1J-R24-BEB103L, PCW1J-R24-CAB102L | P1-P3

Features

■ RoHS compliant*

■ Space saving design

■ Wide range of resistance values

■ PC pin or solder lug terminals

■ Metric shaft and bushing option

■ Mounting brackets available

■ Linear or audio taper versions

PC - “Slimline” 22 mm Square Single Turn Panel Control

*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

*RoHS COMPLIANT

Electrical Characteristics

Standard Resistance Range

Linear Tapers.................................................................................................................................................... 500 ohms to 1 megohm

Audio Tapers ...................................................................................................................................................1 K ohms to 500 K ohms

Total Resistance Tolerance ................................................................................................................................................................±20 %

Independent Linearity .......................................................................................................................................................................... ±5 %

Absolute Minimum Resistance ........................................................................................................................................5 ohms maximum

Eﬀ ective Electrical Angle .............................................................................................................................................................270 ° ± 5 °

Contact Resistance Variation ...................................................................................................................................7 % of total resistance

Dielectric Withstanding Voltage (MIL-STD-202, Method 301)

Sea Level ...............................................................................................................................................................1,000 VAC minimum

70,000 Feet ...............................................................................................................................................................500 VAC minimum

Insulation Resistance (500 V) ....................................................................................................................................1,000 ohms minimum

Power Rating @ 70 ºC (Voltage Limited by Power Dissipation or 350 VAC, Whichever is Less)

Linear ....................................................................................................................................................................................... .75 watt

Audio ........................................................................................................................................................................................ .25 watt

Theoretical Resolution ..................................................................................................................................................... Essentially inﬁ nite

Environmental Characteristics

Operating Temperature Range ................................................................................................................................................+1 °C to +125 °C

Storage Temperature Range .................................................................................................................................................. -40 °C to +125 °C

Temperature Coeﬃ cient Over Storage Temperature Range ...................................................................................................... ±1000 ppm/°C

Vibration .......................................................................................................................................................................................................20 G

Total Resistance Shift ...........................................................................................................................................................±1 % maximum

Voltage Ratio Shift ..............................................................................................................................................................±20 % maximum

Shock ...........................................................................................................................................................................................................50 G

Total Resistance Shift ...........................................................................................................................................................±1 % maximum

Voltage Ratio Shift ..............................................................................................................................................................±20 % maximum

Load Life ....................................................................................................................................1,000 Hours @ Rated Power, 20 % RH, 70 ºC

Total Resistance Shift .........................................................................................................................................................±10 % maximum

Rotational Life (No Load) .............................................................................................................................................................. 50,000 cycles

Total Resistance Shift (Linear taper) ............................................................................................ ±10 ohms or 12 %, whichever is greater

Total Resistance Shift (Audio taper) ...................................................................................................................................±20 % maximum

Contact Resistance Variation ....................................................................................................................................................±5 % maximum

Moisture Resistance .......................................................................................................................... MIL-STD-202, Method 103, Condition B

Total Resistance Shift .........................................................................................................................................................±20 % maximum

IP Rating ...................................................................................................................................................................................................... IP 40

Mechanical Characteristics

Stop Strength (1/4 ” and 6 mm Shaft Diameters) ............................................................................................................ 79.09 N-cm (7 lb.-in.)

Mechanical Angle ............................................................................................................................................................................... 300 ° ± 5 °

Torque

Starting (Detented) ..................................................................................................................................... 0.5-1.5 N-cm (0.75-2.25 oz.-in.)

Starting (Undetented) ............................................................................................................................... 1.5 N-cm (2.25 oz.-in.) maximum

Running (Undetented) ...................................................................................................................... 0.18 to 1.06 N-cm (0.25 to 1.5 oz.-in.)

Mounting .................................................................................................................................................... 79.09 N-cm (7 lb.-in.) maximum

Weight (Single Section) ............................................................................................................................................ 21 gm (0.75 oz.) maximum

Terminals ............................................................................................................................................................................. PC pin or solder lug

Soldering Condition

Manual Soldering .......................................................................................... 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire

370 °C (700 °F) max. for 3 seconds

Wave Soldering ................................................................................................................... 96.5Sn/3.0Ag/0.5Cu solder with no-clean ﬂ ux

260 °C (500 °F) max. for 5 seconds

Wash processes ..............................................................................................................................................................Not recommended

Marking .......................................................................................... Manufacturer’s trademark, resistance value, part number, and date code

Ganging ..................................................................................................................................................................................... 1 cup maximum

Hardware .................. One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.

Detents ..........................................................................................................................................................................Center, 10, 20, 30, none

For additional features or speciﬁ cations not shown, consult factory.

FOR ORDERING INFORMATION SEE PAGE 4.

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

PC - “Slimline” 22 mm Square Single Turn Panel Control

Product Dimensions

"F"

"L"

M9 X 0.75-6g SPL

DIA.

123

"E" 2 PLCS.

3 PLCS.

"F" =

"L" = SEE SHAFT LENGTH TABLE

"E" =

TOLERANCES EXCEPT WHERE NOTED:

.XX = ±

.XXX = ±

DIA.

7.42

(.292)

9.0

(.354)

1.52

(.060)

6.25

(.246)

6.35

(.250)

9.53

(.375)

14.7 ± 0.5

(.578 ± .020)

22.2 ± 0.25

(.874 ± .010)

.320

(8.13)

11.1

(.437)

11.1

(.437)

0.79

(.031)

123

2.54

(.100)

5.08

(.200)

"F" =

"L" = SEE SHAFT LENGTH TABLE

"E" =

6.35

(.250)

9.53

(.375)

2.54

(.100)

5.08

(.200)

.25

(.010)

.13

(.005)

PANEL HOLE DIMENSIONS

9.53

(.375)

9.14

(.360)

DIA.

3.18

(.125)

DIA.

PANEL HOLE DIMENSIONS

9.53

(.375)

9.14

(.360)

DIA.

3.18

(.125)

DIA.

Axial PC Pins

Radial PC Pins

3 PLCS.

"F"

DIA.

14.7 ± 0.5

(.578 ± .020)

22.2 ± 0.25

(.874 ± .010)

.320

(8.13)

11.1

(.437)

11.1

(.437)

.28

(.011)

6.25

(.246)

8.36

(.329)

"L"

3 PLCS.

"E" 2 PLCS.

0.79

(.031)

DIMENSIONS:

(INCHES)

2 PLCS.

3 PLCS.

"L"

"F"

3 PLCS.

"F" =

SOLDER LUGS

(Dimensions not given are the same as

Axial PC pins.

4 PLCS.

"L"

2 PLCS.

"E" 2 PLCS.

DIA. 7 PLCS.

Axial PC PINS

With Rear Mounting Bracket

"L"

4 PLCS.

3 PLCS.

"E" 2 PLCS.

DIA. 7 PLCS.

2 PLCS.

"E" 2 PLCS.

2 PLCS.

Radial PC PINS

With Side Mounting Bracket

"D"

120 ° ± 2 °

DIA.

60 ° ± 2 ° 60 ° ± 2 °

SHAFT STYLES AND ORIENTATION (Full CCW Rotation)

Shaft Style C

"D"

DIA.

Shaft Style J Shaft Style R Shaft Style B Shaft Style Y

DIA.

"D" dimensions extend from shaft end to bushing face "D" = (shaft length, FMS) – (bushing length)

Slot depth (Y shaft) 9.65 (.380)

for shafts <1 " (2.54) length;

14.7 (.520) for shafts ≥1 "

(2.54) length

Shaft Orientations

Shaft Styles C, J Shaft Styles B, R Shaft Style Y

8.36

(.329)

6.25

(.246)

.28

(.011)

7.75

(.305)

5.08

(.200)

2.03

(.080)

1.02 X 2.29

(.040 X .090)

22.2 ± 0.25

(.874 ± .010)

6.35

(.250)

9.53

(.375)

0.76

(.030)

6.83

(.269)

5.87

(.231)

8.31

(.327)

23.37

(.92)

17.07

(.672)

18.87

(.743)

15.2

(.600)

11.43

(.450)

1.19

(.047)

"E" = OR

2.54

(.100)

5.08

(.200)

"E" = OR

2.54

(.100)

5.08

(.200)

0.76

(.030)

17.07

(.672)

0.79

(.031)

6.83

(.269)

12.62

(.497)

23.37

(.92)

5.48

(.216)

5.08

(.200)

1.19

(.047)

11.43

(.450)

7.62

(.300)

5.54 ± .076

(.218 ± .003)

6.32 + 0.03/ - 0.08

(.249 + .001/ - .003)

3.94 + .051/ - .025

(.155 + .002/ - .001)

DIA.

4.75 ± .051

(.187 ± .002)

1.6

(.063)

1.19

(.047)

6.00 ± 0.05

(.236 ± .002)

1.6

(.063)

1.19

(.047)

DIA.

6.32 + 0.03/ - 0.08

(.249 + .001/ - .003)

1.57

(.062)

4.7 ± 0.05

(.185 ± .002)

TOLERANCES EXCEPT WHERE NOTED:

.XX = ±

.XXX = ±

.25

(.010)

.13

(.005)

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

PC - “Slimline” 22 mm Square Single Turn Panel Control

Product Dimensions

DIMENSIONS:

(INCHES)

P1-P3 P4-P4

PCW1J-C24-BEB253L

Mfr. #:

Buy PCW1J-C24-BEB253L

Manufacturer:

Bourns

Description:

Potentiometers 25K 3/4" SHAFT

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

PCW1J-C24-BEB253L

PCW1J-C24-BEB253L

Products related to this Datasheet