DRAWING
NUMBER
2120R
DATE
February
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
Specications and procedures subject to change without notice.
Unless otherwise noted, tolerance ±10%
The Cushion Shielding Bag 2120R protects devices from physical damage as
well as provides static shielding. They also oer a heat sealable inner surface.
Physical Typical Values Testing Method
Thickness 160 mils, 4.1 mm +/- 15% ASTM D1596
Tensile Strength 6469 PSI, 44.57 MPa ASTM D882
Puncture Resistance 15 lbs, 67 N MIL-STD-3010C Method 2065
VHSeal Strength 5 lbs, 22 N ASTM D882
Contact Corrosivity Pass MIL-STD-1003 Method 3005
Electrical Typical Values Testing Method
Surface Resistance
Interior
1 x 10
4
to < 1 x 10
11
ohms
ANSI/ESD STM11.11
Surface Resistance
Exterior
1 x 10
4
to < 1 x 10
6
ohms
ANSI/ESD STM11.11
ESD Shielding <10 nJ ANSI/ESD STM11.31
Heat Sealing Conditions
(if applicable)
Typical Values
Temperature 300°F – 350°F, 149°C – 177°C
Time 2 – 4 seconds
Pressure 30 – 60 PSI, 207 – 414 KPa
2120R CUSHIONED SHIELDING BAG
• Width is measured from
inside seam to inside
seam.
• Length is measured
from the top edge to the
bottom fold.
• Opening is in the “width”
dimension.
Tolerance: Width -0, +1/4"
Length +/- 1/8" Oset 0 to 1/4"
Seal width 3/8" with a tolerance
of +/- 1/8"
Made in the United States of America with Globally Sourced Materials.
