MIXERS - HIGH IP3 - SMT
9
9 - 363
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
List of Materials for Evaluation PCB 114445
[1]
Item Description
J1 - J3 PCB Mount SMA RF Connector
J4 - J5 DC Pin
C1 10,000 pF Chip Capacitor, 0603 Pkg.
U1 HMC585MS8G / HMC585MS8GE Mixer
PCB
[2]
104813 Evaluation Board, 1.0” x 1.0”
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
HMC585MS8G / 585MS8GE
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 400 - 650 MHz
v01.0907
