MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG
www.onsemi.com
2
MAXIMUM RATINGS
Rating Symbol
MUR16
Unit
10CT 15CT 20CT 40CT 60CT
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
100 150 200 400 600 V
Average Rectified Forward Current Per Leg
Total Device, (Rated V
R
), T
C
= 150°C Total Device
I
F(AV)
8.0
16
A
Peak Rectified Forward Current Per Diode Leg
(Rated V
R
, Square Wave, 20 kHz), T
C
= 150°C
I
FM
16 A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
I
FSM
100 A
Operating Junction Temperature and Storage Temperature T
J
, T
stg
*65 to +175 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Per Diode Leg)
Parameter
Symbol Value Unit
Maximum Thermal Resistance, Junction−to−Case
R
q
JC
3.0 2.0 °C/W
ELECTRICAL CHARACTERISTICS (Per Diode Leg)
Characteristic
Symbol 1620 1640 1660 Unit
Maximum Instantaneous Forward Voltage (Note 1)
(i
F
= 8.0 A, T
C
= 150°C)
(i
F
= 8.0 A, T
C
= 25°C)
v
F
0.895
0.975
1.00
1.30
1.20
1.50
V
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, T
C
= 150°C)
(Rated DC Voltage, T
C
= 25°C)
i
R
250
5.0
500
10
mA
Maximum Reverse Recovery Time
(I
F
= 1.0 A, di/dt = 50 A/ms)
(I
F
= 0.5 A, I
R
= 1.0 A, I
REC
= 0.25 A)
t
rr
35
25
60
50
ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%