EEU-TA1C331B

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L
L < 16 : L±1.0 (016×15, 018×15 : L±1.5)
L > 20 : L±2.0
Pressure relief
+
010 <
0D±0.5
fd±0.05
Endurance: 125 °C 2000 h
Heat cycle: 1000 cycle –40 °C to +125 °C
RoHS compliant
Features
(Unit : mm)
Speci cations
Dimensions
Frequency correction factor for ripple current
Radial Lead Type
Series : TA Type : A
0
D 8 10 12.5 16 18
0
d 0.6 0.6 0.6 0.8 0.8
F 3.5 5.0 5.0 7.5 7.5
Category temperature range
–40 °C to + 125 °C
Rated voltage range 10 V .DC to 63 V .DC
Capacitance range 2.2 µF to 4700 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage current I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor
(tan d)
V.DC 10 16 25 35 50 63
(120Hz / +20 °C)
tan d 0.20 0.16 0.14 0.12 0.10 0.09
For capacitance value > 1000 µF , add 0.02 per every 1000 µF.
Endurance
After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specifi ed below.
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
AEC-Q200 AEC-Q200 compliant
Rated voltage
(V.DC)
Capacitance
(µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 63
2.2 to 330 0.55 0.65 0.85 0.90 1.00
470 to 1000 0.70 0.75 0.90 0.95 1.00
2200 to 4700 0.75 0.80 0.90 0.95
1.00
Oct. 201605
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
Rated
voltage
(V.DC)
Cap.
20 %)
(µF)
Case size (mm)
Specifi cation Lead length (mm)
Part No.
Min. Packaging Q'ty
0
DL
Ripple
current
(100 kHz)
(+125 °C)
(mA r.m.s.)
Impedance
(100 kHz)
(+20 °C)
(Ω)
Lead
dia.
0
d
Lead space
Straight
leads
(pcs)
Taping
(pcs)
Straight
Taping
B
10
330 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1A331( ) 200 1000
470 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1A471( ) 200 500
1000
10 20 1100 0.057 0.6 5.0 5.0 EEUTA1A102( ) 200 500
12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1A102S( ) 200 500
2200
12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1A222L( ) 200 500
16 20 1985 0.032 0.8 7.5 7.5 EEUTA1A222( ) 100 250
18 15 1800 0.042 0.8 7.5 7.5 EEUTA1A222S( ) 100 250
3300
16 25 2300 0.024 0.8 7.5 7.5 EEUTA1A332( ) 100 250
18 20 2250 0.031 0.8 7.5 7.5 EEUTA1A332S( ) 100 250
4700
16 31.5 2710 0.020 0.8 7.5 EEUTA1A472 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1A472S( ) 100 250
16
220 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1C221( ) 200 1000
330 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1C331( ) 200 500
470 10 16 945 0.075 0.6 5.0 5.0 EEUTA1C471( ) 200 500
1000
12.5 20 1490 0.042 0.6 5.0 5.0 EEUTA1C102( ) 200 500
16 15 1520 0.047 0.8 7.5 7.5 EEUTA1C102S( ) 100 250
2200
16 25 2300 0.024 0.8 7.5 7.5 EEUTA1C222( ) 100 250
18 20 2250 0.031 0.8 7.5 7.5 EEUTA1C222S( ) 100 250
3300
16 31.5 2710 0.020 0.8 7.5 EEUTA1C332 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1C332S( ) 100 250
4700 18 31.5 3270 0.018 0.8 7.5 EEUTA1C472 50
25
100 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1E101( ) 200 1000
220 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1E221( ) 200 500
330 10 16 945 0.075 0.6 5.0 5.0 EEUTA1E331( ) 200 500
470
10 20 1100 0.057 0.6 5.0 5.0 EEUTA1E471( ) 200 500
12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1E471S( ) 200 500
1000
12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1E102L( ) 200 500
16 20 1985 0.032 0.8 7.5 7.5 EEUTA1E102( ) 100 250
18 15 1800 0.042 0.8 7.5 7.5 EEUTA1E102S( ) 100 250
2200
16 31.5 2710 0.020 0.8 7.5
EEUTA1E222 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1E222S( ) 100 250
3300 18 35.5 3310 0.017 0.8 7.5 EEUTA1E332 50
35
100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1V101( ) 200 500
220 10 16 765 0.130 0.6 5.0 5.0 EEUTA1V221( ) 200 500
330 10 20 930 0.100 0.6 5.0 5.0 EEUTA1V331( ) 200 500
470
12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1V471( ) 200 500
16 15 1450 0.088 0.8 7.5 7.5 EEUTA1V471S( ) 100 250
1000
16 25 2010 0.037 0.8 7.5 7.5 EEUTA1V102( ) 100 250
18 20 2180 0.046 0.8 7.5 7.5 EEUTA1V102S( ) 100 250
2200 18 35.5 2790 0.025 0.8 7.5 EEUTA1V222 50
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch
B=5 mm, 7.5 mm.
· Please refer to the page of “Taping dimensions”.
Characteristics list
Endurance : 125 °C 2000 h
Oct. 201605
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Endurance : 125 °C 2000 h
Rated
voltage
(V.DC)
Cap.
20 %)
(µF)
Case size (mm)
Specifi cation Lead length (mm)
Part No.
Min. Packaging Q'ty
0
DL
Ripple
current
(100 kHz)
(+125 °C)
(mA r.m.s.)
Impedance
(100 kHz)
(+20 °C)
(Ω)
Lead
dia.
0
d
Lead space
Straight
leads
(pcs)
Taping
(pcs)
Straight
Taping
B
50
10 8 11.5 180 0.950 0.6 3.5 5.0 EEUTA1H100( ) 200 1000
22 8 11.5 250 0.650 0.6 3.5 5.0 EEUTA1H220( ) 200 1000
33 8 11.5 300 0.450 0.6 3.5 5.0 EEUTA1H330( ) 200 1000
47 8 11.5 440 0.350 0.6 3.5 5.0 EEUTA1H470S( ) 200 1000
100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1H101( ) 200 500
220 10 20 930 0.100 0.6 5.0 5.0 EEUTA1H221( ) 200 500
330
12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1H331( ) 200 500
16 15 1450 0.088 0.8 7.5 7.5 EEUTA1H331S( ) 100 250
470
12.5 25 1650 0.055 0.6 5.0 5.0 EEUTA1H471L( ) 200 500
16 20 1650 0.053 0.8 7.5 7.5 EEUTA1H471( ) 100 250
18 15 1710 0.075 0.8 7.5 7.5 EEUTA1H471S( ) 100 250
1000
16 31.5 2430 0.031 0.8 7.5 EEUTA1H102 100
18 25 2350 0.032 0.8 7.5 7.5 EEUTA1H102S( ) 100 250
63
22 8 11.5 310 0.470 0.6 3.5 5.0 EEUTA1J220( ) 200 1000
33 10 12.5 410 0.360 0.6 5.0 5.0 EEUTA1J330( ) 200 500
47 10 16 460 0.270 0.6 5.0 5.0 EEUTA1J470( ) 200 500
100 10 20 680 0.205 0.6 5.0 5.0 EEUTA1J101( ) 200 500
220
12.5 25 1325 0.100 0.6 5.0 5.0 EEUTA1J221L( ) 200 500
16 20 1360 0.085 0.8 7.5 7.5 EEUTA1J221( ) 100 250
18 15 1300 0.120 0.8 7.5 7.5 EEUTA1J221S( ) 100 250
330
16 25 1660 0.070 0.8 7.5 7.5 EEUTA1J331( ) 100 250
18 20 1760 0.077 0.8 7.5 7.5 EEUTA1J331S( ) 100 250
470
16 31.5 2055 0.060 0.8 7.5 EEUTA1J471 100
18 25 1990 0.060 0.8 7.5 7.5 EEUTA1J471S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch
B=5 mm, 7.5 mm.
· Please refer to the page of “Taping dimensions”.
Oct. 201605

EEU-TA1C331B

Mfr. #:
Manufacturer:
Panasonic
Description:
Aluminum Electrolytic Capacitors - Radial Leaded 330uF 16volts AEC-Q200
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union