WiPort b/g Data Sheet – Rev 1.0 (March 2006)
Page 5 of 7
WiPort Technical Data
Category Description
CPU, Memory Lantronix DSTni-EX 186 CPU, 256 KB zero wait state on-chip SRAM,
2048 KB Flash, 16 KB Boot ROM
Firmware Upgradeable via TFTP and serial port
Reset Circuit Reset In is low active. Minimum reset pulse width is 2 ms at IIL = -500µA
Serial Interface CMOS (Asynchronous) 3.3V-level signals
Rate is software selectable (300 bps to 921600 bps)
Serial Line Formats 7 or 8 data bits, 1-2 Stop bits, Parity: odd, even, none
Modem Control DTR, DCD
Flow Control XON/XOFF (software), CTS/RTS (hardware), none
Network Interface Wireless 802.11b, 802.11g and 10/100 Ethernet
Protocols Supported ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP, SMTP, TFTP
Media Access Control CSMA/CA with ACK
Frequency Range 2.412 – 2.484 GHz
Range Up to 328 feet (100m) indoors
Modulation
Techniques
OFDM
DSSS
CCK
DQPSK
DBPSK
64 QAM
16 QAM
Transmit Output Power 14 dBm + 1.5dBm/- 1.0 dBm
Peak Supply Current
at 3.3V
650 mA
Management Internal web server, SNMP (read only)
Serial login, Telnet login
DeviceInstaller software
Security Password protection, locking features, 64/128 bit WEP, WPA-PSK, End-to-End AES
Internal Web Server Serves web pages
Storage capacity: 1.2 MB
Weight 29 grams
Material Metal shell
Temperature Operating range: -30°C to + 70°C (-22°F to 158°F)
Storage range: -40°C to +85°C (-40°F to 185°F)
Warranty 2-year limited warranty
Included Software Windows™ 98/NT/2000/XP based DeviceInstaller configuration software and Windows™
based Comm Port Redirector, DeviceInstaller, Web-Manager.
Average Power Consumption at 3.3V
WLAN / Ethernet Mode High Performance (@ 88 MHz) /
Nominal Performance (@ 48 MHz)
Power Consumption
WLAN mode High performance, data transfer at 922 kbps 1300mW
WLAN mode Nominal performance, data transfer at 230 kbps 950mW
WLAN mode High performance, no data transfer 580mW
WLAN mode Nominal performance, no data transfer 300mW
Ethernet mode * Nominal performance, no data transfer 750mW
* Applicable only when the wired 802.3 interface is implemented and activated.