ICL3217CAZ Datasheet ICL3207IAZ, ICL3207IAZ-T, ICL3217CAZ-T | P10-P12

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

About Intersil

Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products

address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.

For the most updated datasheet, application notes, related documentation and related parts, please see the respective product

information page found at www.intersil.com

You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.

Reliability reports are also available from our website at www.intersil.com/support

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that

you have the latest revision.

DATE REVISION CHANGE

August 21, 2015 FN4892.7 Updated Ordering Information table on page 2.

Added Revision History and About Intersil sections.

Updated Package Outline Drawing M24.3 to the latest revision updates are as follows:

-Revision 0 to Revision 1, Removed µ symbol which is overlapping the alpha symbol in the diagram.

-Revision 1 to Revision 2, Updated to new POD standard by removing table listing dimensions and putting

dimensions on drawing. Added Land Pattern.

ICL3207, ICL3217

Shrink Small Outline Plastic Packages (SSOP)

NOTES:

1. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of

Publication Number 95.

2. Dimensioning and tolerancing per ANSI Y14.5M-1982.

3. Dimension “D” does not include mold flash, protrusions or gate burrs.

Mold flash, protrusion and gate burrs shall not exceed 0.20mm

(0.0078 inch) per side.

4. Dimension “E” does not include interlead flash or protrusions. Inter-

lead flash and protrusions shall not exceed 0.20mm (0.0078 inch) per

side.

5. The chamfer on the body is optional. If it is not present, a visual index

feature must be located within the crosshatched area.

6. “L” is the length of terminal for soldering to a substrate.

7. “N” is the number of terminal positions.

8. Terminal numbers are shown for reference only.

9. Dimension “B” does not include dambar protrusion. Allowable dambar

protrusion shall be 0.13mm (0.005 inch) total in excess of “B” dimen-

sion at maximum material condition.

10. Controlling dimension: MILLIMETER. Converted inch dimensions

are not necessarily exact.

INDEX

AREA

123

-B-

0.25(0.010) C AM BS

-A-

-C-

SEATING PLANE

0.10(0.004)

0.25(0.010) BM M



0.25

0.010

GAUGE

PLANE

M24.209 (JEDEC MO-150-AG ISSUE B)

24 LEAD SHRINK SMALL OUTLINE PLASTIC PACKAGE

SYMBOL

INCHES MILLIMETERS

NOTESMIN MAX MIN MAX

A - 0.078 - 2.00 -

A1 0.002 - 0.05 - -

A2 0.065 0.072 1.65 1.85 -

B 0.009 0.014 0.22 0.38 9

C 0.004 0.009 0.09 0.25 -

D 0.312 0.334 7.90 8.50 3

E 0.197 0.220 5.00 5.60 4

e 0.026 BSC 0.65 BSC -

H 0.292 0.322 7.40 8.20 -

L 0.022 0.037 0.55 0.95 6

N24 247



Rev. 1 3/95

ICL3207, ICL3217

Package Outline Drawing

M24.3

24 LEAD WIDE BODY SMALL OUTLINE PLASTIC PACKAGE (SOIC)

Rev 2, 3/11

TOP VIEW

NOTES:

1. Dimensioning and tolerancing per ANSI Y14.5M-1982.

2. Package length does not include mold flash, protrusions or gate

burrs. Mold flash, protrusion and gate burrs shall not exceed

0.15mm (0.006 inch) per side.

3. Package width does not include interlead flash or protrusions.

Interlead flash and protrusions shall not exceed 0.25mm

(0.010 inch) per side.

4. The chamfer on the body is optional. If it is not present, a visual

index feature must be located within the crosshatched area.

5. Terminal numbers are shown for reference only.

6. The lead width as measured 0.36mm (0.014 inch) or greater above

the seating plane, shall not exceed a maximum value of 0.61mm

(0.024 inch).

7. Controlling dimension: MILLIMETER. Converted inch dimensions in

( ) are not necessarily exact.

8. This outline conforms to JEDEC publication MS-013-AD ISSUE C.

SIDE VIEW “A”

SIDE VIEW “B”

TYPICAL RECOMMENDED LAND PATTERN

INDEX

AREA

123

SEATING PLANE

DETAIL "A"

x 45°

7.60 (0.299)

7.40 (0.291)

0.75 (0.029)

0.25 (0.010)

10.65 (0.419)

10.00 (0.394)

1.27 (0.050)

0.40 (0.016)

15.60 (0.614)

15.20 (0.598)

2.65 (0.104)

2.35 (0.093)

0.30 (0.012)

0.10 (0.004)

1.27 (0.050)

0.51 (0.020)

0.33 (0.013)

0.32 (0.012)

0.23 (0.009)

8°

0°

1.981 (0.078)

9.373 (0.369)

0.533 (0.021)1.27 (0.050)

P1-P3 P4-P6 P7-P9 P10-P12

ICL3217CAZ

Mfr. #:

Buy ICL3217CAZ

Manufacturer:

Renesas / Intersil

Description:

RS-232 Interface IC RS232 3V 5D/3R AUTODWN 24SSOP COM

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

ICL3217CAZ

ICL3217CAZ

Products related to this Datasheet