CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Characteristics
Code
Temp. Coeff.
Capacitance Standard Cap.
ppm/ ºC Drift Range
C –200 to +200 ±(0.5% +0.1pF) 1–18 pF
E –20 to +100 ±(0.1% +0.1 pF) 20–82 pF
F 0 to +70 ±(0.05% +0.1 pF) 91 pF and up
Vibration Grade
Vibration
No. MIL-STD-202 Condition (Hz)
1 Method 201 10 to 55
3 Method 204
Condition D
10 to 2,000
Capacitance Tolerance
Tol.
Capacitance
Code Tolerance Range
C ±1 pF 1– 9 pF
D ±1⁄2 pF 1–99 pF
E ±1⁄2 % 100 pF and up
F ±1 % 50 pF and up
G ±2 % 25 pF and up
H ±3 % 18 pF and up
J ±5 % 10 pF and up
CDE MIL-C-5
Type Number
Style Number
CD10 CM04 CM09
CD15 CM05 CM10
CD19 CM06 CM11
CD30 CM07 CM12
CD15 C D 100 J O 3 F
Series Characteristic
Code
Voltage
(Vdc)
Capacitance
(pF)
Capacitance
Tolerance
Temperature
Range
Vibration
Grade
Blank =
Not Specified
F= RoHS
Compliant
Y = 50 Vdc F = 1000 Vdc
A = 100 Vdc H = 1500 Vdc
C = 300 Vdc J = 2000 Vdc
D = 500 Vdc K = 2500 Vdc
010 = 1 pF
(1.5) = 1.5 pF
361 = 360 pF
122 = 1200 pF
O = –55 ºC to +125 ºC
P = –55 ºC to +150 ºC
MIL-C-5 Capacitors
Ordering Information Radial-Leaded Dipped Mica Capacitors
Order by complete part number as below. For other options, write your requirements on your purchase order or
request for quotation.
Ordering Information
Radial-Leaded Silvered Mica Capacitors (Except D7, D10*)
Options Available
♦ Non-flammable units per IEC 695-2-2 are available for
standard dipped capacitors. Specify IEC 695-2-2 on
your order.
♦ Tape and reeling, specify per next page.
♦ “P” temperature range available for CD10,
CD15, CD19, CD30, CD42, CDA15
♦ For MIL-C-5 capacitors, see below.
Capacitors are available marked and manufactured to the
requirements of standard MIL-C-5. To order the MIL-
C-5 part number, change the Catalog Number by
replacing the CDE type with the MIL-C-5 Style Number
using the table below. Example: Change CD15ED470J03
to CM05ED470J03.
The following ratings have no MIL-C-5 equivalents:
Type CD10: 2, 3, 4, 50, 250 and 400 pF
Type CD15: 2, 3, 4, 50, 250, 430 and higher pF
Type CD19: 390 and lower pF, 2,500 pF, and 5000
and higher pF
Type CD30: 5,000 and lower pF,
33,000 and higheer pF
Standard tolerance is ±½ pF for less
than 10 pF and ±5% for 10 pF and up
Standard vibration grade is 3, the more
severe requirement
* Order Type D7 and D10 using the Catalog Numbers shown in the ratings tables.
Note: RoHS compliant not available for CD6, CD7 or MIL-C5 parts.