chipKIT Lenny Development Board
Part Number: TCHIP005
The chipKIT Lenny was inspired by the Arduino Leonardo, and adds additional capabilities afforded
by its 32-bit microcontroller. The Lenny has 27 available I/O lines, 6 of which can be used as analog
inputs. Based on the 32-bit PIC32MX270F256D microcontroller, operating at 3.3 volts and 40
MHz. Direct access to the USB peripheral controller enables the Lenny to emulate many types of
USB devices; note that this functionality will be available in a future library.
Features
o
256K of Flash, 64K of RAM
o
Two I2S/SPI modules for Codec and serial communications
o
Parallel Master Port (PMP) for graphics interfaces
o
Charge Time Measurement Unit (CTMU)
o
Two UART and I2C™ modules
o
Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)
o
Five Capture inputs and Five Compare/PWM output
http://www.microchip.com/developmenttools/productdetails.aspx?partno=tchip005 3/29/2017
