DO NOT
SCALE FROM
THIS PRINT
LCW-1XX-XX-X-X-XXX-XX
No OF POSITIONS
-01 THRU -36
BODY SPECIFICATION
-S: SINGLE (USE LCW-36-S)
-M: SINGLE MODIFIED, SEE FIG 2 (USE LCW-36-S)
LEAD STYLE
(SEE TABLE 2)
PLATING SPECIFICATION
-G: 10µ" SELECTIVE GOLD IN CONTACT
AREA, 3µ" SELECTIVE GOLD ON TAIL.
-T: MATTE TIN ON CONTACT AND TAIL.
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT
AREA, 3µ" SELECTIVE GOLD ON TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
LEAD FORM SPECIFICATION
BLANK: SEE FIG 1
RA: SEE FIG 3
RE: SEE FIG 3
RP: SEE FIG 3 & IN-PROCESS
PR: SEE FIG 4 & IN-PROCESS
RR: SEE FIG 4
LL: SEE FIG 5 (N/A ON 1 & 2 POSITIONS OR ANY
RX OR XR LEAD STYLES)
XX: INDICATES POSITION TO BE OMITTED.
POST LENGTH "B"
-230: .230[5.84]
-300: .300[7.62]
(-300 NOT AVAILABLE IN -7, -16, OR -17 LEAD STYLES
(NO OF POS x .100[2.54])
±.010[0.25]
(SEE NOTE 4)
01
"B"
.100
REF
2.54
.310 7.87
.200 5.08
REF
CONTACT AREA
"C"
90°
"D" REF
FIG 3
-RA, -RE, AND -RP OPTION
LCW-1XX-X-XX-S-XXX-RA SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SEE TABLE 3)
"C"
FIG 4
-PR AND -RR OPTION
LCW-1XX-X-XX-S-XXX-RR SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
(SEE TABLE 3)
.010 0.25
MAX
FIG 2
-M: SINGLE MODIFIED
LCW-1XX-X-XX-M-XXX SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.0080 0.203
(TYP)
.040
±.010
1.02
±0.25
.300
MAX
7.62
FIG 5
-LL: LOCKING LEAD
LCW-1XX-X-XX-S-XXX-LL SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
EVEN POSITIONS
C
L
ODD POSITIONS
C
L
= CRIMP LOCATION
"B" - .040[1.02]
IN-PROCESS
FOR RP &PR ONLY
C
FIG 1
LCW-1XX-X-XX-S-230 SHOWN
36
"D" = OVERALL LENGTH - "B" -"C" -.180
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
LOCK CLIP WIREWRAP ASSEMBLY
BY:
LCW-1XX-XX-X-X-XXX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
L WILLIAMS
01/11/1985
1
1
SHEET SCALE: 2:1
INSULATOR: PBT, UL 94 VO, COLOR: BLACK
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\LCW-1XX-XX-X-X-XXX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 3 LBS.
3. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .010[0.25]
4. TOLERANCE FOR THIS DIMENSION IS +.005/-.015 FOR 36 POSITION PARTS.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION AC
