Z8 Encore! XP
®
F08xA Series Development Kit
User Manual
F08xA Series Development Board UM018603-1005
8
Features
Z8 Encore!
®
MCU (28-pin SOIC)
3 LEDs
RS-232 interface
IrDA transceiver
Two pushbuttons, RESET and TEST
5 VDC power connector
On-Chip Debugger interface
20 MHz Ceramic Oscillator (Y1)
Header for ADC input
Prototyping area
External interface connectors JP1 and JP2
2.7–3.6 V operating voltage with 5V-tolerant inputs
MCU
The Z8 Encore! XP F08xA Series MCU is member of a family of ZiLOG
microcontroller products based upon the 8-bit eZ8 core CPU. The Flash
in-circuit programming capability allows for faster development time and
program changes in the field. The eZ8 core CPU is upward compatible
with existing Z8
®
instructions. The rich peripheral set of the Z8 Encore!
XP F08xA Series makes it suitable for a variety of applications including
motor control, security systems, home appliances, personal electronic
devices, and sensors.
The Development board contains circuitry to support and present all the
features of the Z8 Encore! XP F08xA Series. The main features of the Z8
Encore! XP F08xA Series are:
Z8 Encore! XP
®
F08xA Series Development Kit
User Manual
UM018603-1005 F08xA Series Development Board
9
eZ8 core CPU
8KB Flash memory with in-circuit programming capability
1KB register RAM
8-channel, 10-bit analog-to-digital converter (ADC)
Full-duplex UART
Infrared Data Association (IrDA)-compliant infrared encoder/decoder
Two 16-bit timers with capture, compare, and PWM capability
Watch-Dog Timer (WDT) with internal RC oscillator
Eleven (20-pin package) or nineteen (28-pin package) I/O pins
Programmable priority interrupts
On-Chip Debugger
Voltage Brown-out Protection (VBO)
Power-On Reset (POR)
2.7–3.6 V operating voltage with 5V-tolerant inputs
Operating temperatures: 20° ±10° C
For further information on the Z8 Encore!
®
family of devices, consult the
product specification, P/N PS0247, available for download from
www.zilog.com
.
UART with IrDA Endec
The Z8 Encore! XP F08xA Series (component U5) contains a fully-func-
tional, high-performance UART with Infrared Encoder/Decoder
(ENDEC). The Infrared Endec is integrated with an on-chip UART allow-
ing easy communication between the Z8 Encore!
®
XP F08xA Series and
IrDA transceivers. Infrared communication provides secure, reliable, low-
Z8 Encore! XP
®
F08xA Series Development Kit
User Manual
F08xA Series Development Board UM018603-1005
10
cost, point-to-point communication between PCs, PDAs, cell phones,
printers and other infrared enabled devices.
Power and Communication Interfaces
Table 1 provides jumper information concerning the shunt status, func-
tions, devices and defaults affected of jumpers JP3 and JP4.
External Interface Headers JP1 and JP2
External interface headers JP1 and JP2 are shown in the schematic on
page 13.
Table 1. Jumpers JP3 and JP4
Jumper Status
Device
Affected Status Default
JP3* OUT RS-232
interface
Enabled X
JP3 IN RS-232
interface
Disabled
JP4* OUT IrDA interface Enabled
JP4 IN IrDA interface Disabled X
JP5 OUT U5 RESET
/
PD0
PD0 (GPIO) X
JP5 IN U5 RESET
/
PD0
RESET when
SW1 pressed
Note: * These jumpers must not be OUT at the same time

Z8F08A28100KIT

Mfr. #:
Manufacturer:
ZiLOG
Description:
Development Boards & Kits - Other Processors Z8 ENCORE! XP F08XA SERIES 28-PIN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet