NLP25-7629 Datasheet NLP25-7617, NLP25-7624, NLP25-7624J | P1-P3

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25 W AC/DC Universal Input Switch Mode Power Supplies 1

2 YEAR WARRANTY

NLP25 Series

Single, dual and triple output

• 4.00 x 2.07 x 0.91 inch package

• Overvoltage protection and short circuit protection

• 25 W with free air convection cooling

• EN55022, EN55011 conducted emissions level B

• UL, VDE, CSA and CCC safety approvals

• Available RoHS compliant

The NLP25 series is a 25 W universal input ac-dc power supply on a 4.00 x 2.07

inch card with a profile of less than 1 inch. The availability of four single output and

three multiple output models in an extremely small package size make the NLP25

ideal for use in space critical, low power communication applications requiring an

off line power solution. The NLP25 provides 25 W of output power with free air

convection cooling which can peak at 30 W for 60 seconds. Standard features

include overvoltage and short circuit protection. The series, with full international

safety approvals and the CE mark, meets conducted emissions EN55022 level B

and complies to EN61000-4-2,-3,-4, -5 and -6 immunity standards. The NLP25

series is designed for use in off line, low power data networking and computer

applications with limited space, such as hubs, routers, POS terminals, external disk

storage and cable modems. The availability of 5 V outputs in single and multiple

configurations provides a solution for a myriad of microprocessor applications.

All specifications are typical at nominal input, full load at 25 °C unless otherwise stated

EMC CHARACTERISTICS

Radiated emissions EN55022/11, FCC part 15 Level A

Conducted emissions EN55022/11, FCC part 15 Level B

Electrostatic discharge EN61000-4-2 Level 2

Electrical fast EN61000-4-4 Level 3

transients/bursts

Surge susceptibility EN61000-4-5 Level 3

RF field susceptibility EN61000-4-3 Level 3

RF conducted EN61000-4-6 Level 3

disturbance

GENERAL SPECIFICATIONS

Hold-up time 110 Vac @ full load 5 ms typ.

Efficiency 110 Vac @ full load 70% typ.

Isolation voltage Input/output 3000 Vac

Input/chassis 1500 Vac

Switching frequency Fixed 60 kHz, ±10 kHz

Approvals and EN60950, IEC950

standards VDE0805, UL1950, CCC60950

(See Notes 4, 8) CSA C22.2 No. 950

Weight 115 g (4 oz)

MTBF MIL-HDBK-217F 150,000 hours min.

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient, FL 0 °C to +50 °C

(See Notes 7, 8) Non-operating -40 °C to +85 °C

0 °C to 50 °C, ambient, Full load

convection cooled

Peak See Note 1

Relative humidity Non-condensing 5% to 95% RH

Altitude Operating 10,000 feet max.

Non-operating 30,000 feet max.

Vibration (See Note 6) 5-500 Hz 2.4 G rms peak

Shock MIL-STD-810E 516.4 Part IV

OUTPUT SPECIFICATIONS

Total regulation Main output ±2.0%

(Line and load) Auxiliary outputs ±5.0%

Overshoot/undershoot At turn-on 2.0%

Transient response Main output ±5.0% max. dev.,

50% to 100% 1 ms recovery

full load step to 1.0%

Temperature coefficient ±0.02%/°C

Overvoltage protection Main output See table

Short circuit protection Continuous with

autorestart

Minimum output current See table

INPUT SPECIFICATIONS

Input voltage range Universal input 90-264 Vac

127-375 Vdc

Input frequency range 47-440 Hz

Input current 90 Vac 0.75 A rms max.

230 Vac 0.35 A rms max.

Safety ground 120 Vac, 60 Hz 0.2 mA

leakage current 230 Vac, 50 Hz 0.4 mA

SPECIFICATIONS

File Name: NLP25.PDF Rev (02): 08 Nov 2005

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

1 Peak output current lasting less than 60 seconds with duty cycle less than

5.0%. During peak loading, output voltage may exceed total regulation

limits.

2 20 MHz bandwidth, peak to peak, measured differentially with a 12 inch

twisted pair of number 16 AWG copper wire, terminated with a 47 µF

capacitor of proper polarity and voltage rating.

3 Total regulation is defined as the static output regulation at 25 ºC, including

initial tolerance, line voltage within stated limit, load current within stated

limit, and output voltage adjusted to their factory settings. To achieve

specified regulation on multiple output models, minimum loads are required

on V(A) and V(B) as outlined in above table.

4 To maintain user-system safety approvals, the input power cable must be

appropriately rated and approved.

5 Main output voltage is protected by a Zener diode.

6 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G

rms 5 Hz to 500 Hz.

7 CAUTION: Allow a minimum of 5 seconds after disconnecting line power

when making thermal measurements.

8 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

9 All models of the NLP25 series are floating output except for the NLP25-

7612J unit. The NLP25-7612J unit has its 0 Vdc output (return on J2 pins

2 and 4) directly connected to the incoming earth/ac ground. For the NLP-

7612J floating output please consult Artesyn Technologies.

10 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

11 NOTICE: Some models do not support all options. Please contact your

local Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

NLP25 Series

Single, dual and triple output

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25 W AC/DC Universal Input Switch Mode Power Supplies 2

File Name: NLP25.PDF Rev (02): 08 Nov 2005

OUTPUT PIN CONNECTIONS

J2 SINGLE DUAL TRIPLE

Pin 1 V (A) No Connection V (C)

Pin 2 Return Return Return

Pin 3 V (A) V (A) V (A)

Pin 4 Return Return Return

Pin 5 V (A) V (B) V (B)

INPUT

PIN CONNECTIONS

Pin 1 AC Ground

Pin 3 AC Line

Pin 5 AC Neutral

OUTPUT OUTPUT

OUTPUT CURRENT

RIPPLE

(2)

OVP TOTAL MODEL

POWER VOLTAGE MIN

(3)

MAX PEAK

(1)

THRESHOLD

(5)

REGULATION

(3)

NUMBER

(9,10,11)

20.8 W +5 V (I

) 0.2 A 2 A 2.5 A 50 mV 5.6-6.9 V ±2.0% NLP25-7608J

+12 V (I

) 0.1 A 0.8 A 1.2 A 120 mV ±5.0%

–12 V (I

)0 A 0.1 A 0.15 A 50 mV ±5.0%

20.1 W +5 V (I

) 0.2 A 2 A 2.5 A 50 mV 5.6-6.9 V ±2.0% NLP25-7607J

+12 V (I

) 0.1 A 0.8 A 1.2 A 120 mV ±5.0%

–5 V (I

)0 A 0.1 A 0.15 A 50 mV ±5.0%

19.6 W +5 V (I

) 0.2 A 2 A 2.5 A 50 mV 5.6-6.9 V ±2.0% NLP25-7629J

+12 V (I

) 0.1 A 0.8 A 1.2 A 120 mV ±5.0%

25 W +5 V 0 A 5 A 6 A 50 mV 5.6-6.9 V ±2.0% NLP25-7605J

25 W +12 V 0 A 2.08 A 2.5 A 120 mV 14-16.7 V ±2.0% NLP25-7612J

25 W +24 V 0 A 1.04 A 1.25 A 150 mV 29-34.2 V ±2.0% NLP25-7624J

25 W +48 V 0 A 0.52 A 0.6 A 150 mV 55-60 V ±2.0% NLP25-7617J

2005

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

NLP25 Series

Single, dual and triple output

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25 W AC/DC Universal Input Switch Mode Power Supplies 3

www.artesyn.com

File Name: NLP25.PDF Rev (02): 08 Nov 2005

2.07 ±0.02

(52.58 ±0.5)

ALL DIMENSIONS IN INCHES (mm)

ø0.125 ±0.01

(ø3.18 ±0.25)

4.00 ±0.02

(101.60 ±0.5)

3.730

±0.02

(94.74 ±0.5)

1.80

±0.02

(45.72 ±0.5)

If Metallic fastners are used, Max. stand-off dia.

should be 0.212 (5.38) and the screw or washer

should not protrude beyond the circle.

Maximum

Component

Height 0.91 (23.11)

International Safety Standard Approvals

VDE0805/EN60950/IEC950 File No. 10401-3336-0118

Licence No. 104743

UL1950 File No. E136005

CSA C22.2 No. 950 File No. LR41062

China Compulsory Certification 60950

Input and output connectors Mating connectors

AC (J1) connector type AC (J1) mating connector type

Molex 22-23-2051 or equivalent. Molex 22-01-2057 with Molex

08-52-0123 crimp terminals

or equivalent.

DC (J2) connector type DC (J2) mating connector type

Molex 22-23-2051 or equivalent. Molex 22-01-2057 with Molex

08-52-0123 crimp terminals

or equivalent.

P1-P3

NLP25-7629

Mfr. #:

Buy NLP25-7629

Manufacturer:

Artesyn Embedded Technologies

Description:

Switching Power Supplies 19.6W +5/+12V

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

NLP25-7629

NLP25-7629

Products related to this Datasheet