HARDWARE FEATURES:
u
LS2088A CPU Up to 8 x ARM
Cortex
®
-A72 cores, up to 2.0 GHz core
speed
u
Memory
– SDRAM supporting dual ranked
DIMM slot, 2 x DDR4 uDIMM x72
support for 4 GB memory per slot,
2.1 GT/s data rate, ECC enable
– Support for an additional dual rank
uDIMM slot. One x ½ uDIMM x 40
support for 1 GB memory, 1.6 GT/s
data rate
– 128 MB NOR flash, 8-bit
– 2 GB SLC NAND flash
u
PCI Express
®
– One standard slot x 8 PCIe
connector to support 1 x 8 PCIe
Gen3 or 2 x 4 PCIe through a
connector
u
USB 3.0
– Two USB type A connectors on the
front or rear panel connected to a
USB PHY; one configured as a host,
the second as OTG
u
SATA
– 2 x SATA connectors; these will be
muxed from the PCIe SERDES and
configured through a switch on the
board
u
Ethernet
– Support for up to four (4) of 10 GbE,
SFP+
– Support for up to four (4) of 10 GbE,
copper (4 x RJ45)
SOFTWARE FEATURES:
u
U-Boot boot loader
u
Linux kernel with DPAA2 networking
support
u
GNU tool chain for ARMv8 technology
u
Large set of standard Linux user space
packages including shells, initialization
scripts and servers
u
Support for DPAA2
– Management complex firmware for
the DPAA2 architecture
u
Linux kernel support for treating DPAA2
containers as plug-and-play busses with
VFIO support
u
Integrated control of DPAA2 L2 switch
objects
u
NADK, a Linux user space environment
providing functions and interfaces
oriented toward packet processing
applications
u
Support for an open-architecture parallel
processing packet engine
– “Service layer” which provides
interfaces and APIs for packet
processing programs that run on the
advanced packet processor
– Available CodeWarrior
®
tool chain
u
Fully integrated market-ready solutions
that integrate NXP-supplied datapaths
(i.e., IP forwarding, IPSec, Netflow,
BFD, SDN, ETh OAM and many other
networking functions and protocols)
– Users may also integrate these
advanced packet processing
datapaths themselves
QorIQ LS2088A RDB SYSTEM BLOCK DIAGRAM
128 MB NOR & 2 GB 8-bit NAND
POR Cfg. Power CKt VID Single Clocking
2100 MT/s DDR4/72-bit 4 GB Dual Rank
2100 MT/s DDR4/72-bit 4 GB Dual Rank
1600 MT/s DDR4/40-bit 1 GB
RS232
Serial
AQ2402
CS434
EEPROM/ Tem Sensor/RTC
64 MB EEPROM
JTAG
SDXC
PCIe x 8
x8
10gBaseT10G/1G/100M
USB 3.0 Micro-AB
USB 3.0 Standarad A
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
PCIe x 4
PCIe x 4
MUX SATA x 2
SATA x 4
QorIQ
®
LS2088A
IFC
DDR
DDR
DDR
PCIe
XFI x 4
XFI x 4
SD
USB 3.0
USB 3.0
DUART
SPI
COP
I
2
C
QorIQ LS2085A RDB BLOCK DIAGRAM
QorIQ LS2088A REFERENCE DESIGN BOARD
nxp.com/QorIQ
NXP, the NXP logo, CodeWarrior and QorIQ are trademarks of NXP B.V. All other product or service
names are the property of their respective owners. ARM and Cortex are registered trademarks of ARM
Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved.
© 2016 NXP B.V.
Date of Release: November 2016
Document Number: LS2088ARDBFS REV 0
