Freescale, the Freescale logo, CodeWarrior, QorlQ, QorlQ Qonverge and StarCore are trademarks of Freescale Semiconductor,
Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners.
© 2014 Freescale Semiconductor, Inc.
Document Number: BSC913xNW Rev 0
For more information about the QorIQ Qonverge BSC series,
visit freescale.com/QorIQQonverge
research and design investment. The
BSC9131 and BSC9132 SoCs also include
the MAPLE block for hardware acceleration
of common DSP functions such as fast
Fourier transform, discrete Fourier transform
and turbo Viterbi decoding.
The QorIQ Qonverge line of products has
a proven set of hardware and software
tools for code development and debug.
The CodeWarrior Development Studio is
a comprehensive integrated development
environment (IDE) that provides a highly
visual and automated framework to accelerate
the development of the most complex
embedded applications. The CodeWarrior
tools allow a consistent look and feel for
developing code on both cores as opposed to
competing solutions that may require multiple
debugging platforms. In addition to the IDE,
the BSC9131RDB and BSC9132QDS give
you the ability to develop and test code on
hardware systems before developing your
own hardware solution.
QorIQ Qonverge BSC9131
ReferenceDesign Board
QorIQ Qonverge BSC9132
Development Board
QorIQ Qonverge BSC9131 and BSC9132 Comparison Chart
BSC9131 BSC9132
GPP 1 x e500, 256 KB L2 up to 1 GHz 2 x e500, 512 KB shared L2 up to 1.2 GHz
DSP/Starcore 1 x SC3850 with 512 KB L2 cache
up to 1 GHz
2 x SC3850 each with 512 KB L2 cache,
up to 1.2 GHz
DSP hardware
accelerators
1 x MAPLE B2F array
FFT, convolution, Viterbi Turbo, Filtering, CRC
1 x MAPLE B2P array
FFT, convolution, Viterbi Turbo, Filtering, CRC
Memory 1 x DDR3, 32-bit (16-bit mode only with
ECC), up to 800 MHz
2 x DDR3, 32-bit (40-bit including ECC),
up to 1333 MHz
Flash NOR, NAND and FPGA integrated NOR, NAND and FPGA integrated
Trust architecture
secure boot
Yes Yes
SEC hardware
encryption
SEC v4.4 SEC v4.4
Pulse width
modulators
2 2
GigE with integrated
1588v2
2 2
USB 1 x 2.0 1 x 2.0
PCIe No Yes
TDM 1 2
CPRI No Yes
JESD207 3: – 2 dual, 1 single lane 4: – 3 dual, 1 single lane
Other interfaces UART, SPI, eSDHC, USIM, and I
2
C controller UART, SPI, eSDHC, USIM, and I
2
C controller
QorIQ Qonverge BSC9131 SoC Block Diagram
QorIQ Qonverge BSC9131 Processor
StarCore SC3850
DSP Core
512 KB
L2 Cache
DMA
USB
2.0
Security
Engine
V4.4
1x GE 1x GE
IEEE
®
1588
Ethernet
32 KB L1
I-Cache
Multicore Fabric
32 KB L1
D-Cache
32 KB
I-Cache
32 KB
D-Cache
MAPLE-B2F
Baseband
Accelerator
LTE/UMTS/CDMA2K
e500 Core
Built on
Power Architecture
®
32-bit
DDR3/3L
Memory
Controller
RF Interface
(JESD207/ADI)
and MaxPHY
256 KB
L2 Cache
Coherency
Module
4x eSPI
2x DUART
2x I
2
C
GPIO
USIM
IFC
eSDHC
2x PWM
Clocks/Reset