RT9059
4
DS9059-10 February 2016
www.richtek.com
©
Copyright 2016 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Electrical Characteristics
(V
DD
= 5V, C
IN
= C
OUT
= 10μF, C
VDD
= 1μF, T
A
= 25°C, unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
VDD Operation Range V
DD
3 -- 5.5 V
VDD POR Threshold V
POR_VDD
V
DD
Rising 2.4 2.7 3 V
VDD POR Falling Hysteresis V
POR_VDD
V
DD
Falling 0.15 0.2 -- V
Input Voltage Range V
IN
1 -- 5.5 V
VIN POR Threshold V
POR_VIN
V
IN
Rising 0.7 0.8 0.9 V
VIN POR Falling Hysteresis V
POR_VIN
V
IN
Falling 0.15 0.2 0.25 V
Quiescent Current I
Q
EN On, No Load -- 0.6 1.2 mA
Absolute Maximum Ratings (Note 1)
Supply Input Voltage, VIN to GND
DC----------------------------------------------------------------------------------------------------------------------------- −0.3V to 6V
< 10ms----------------------------------------------------------------------------------------------------------------------- −0.3V to 7V
Control Voltage, VDD
to GND
DC----------------------------------------------------------------------------------------------------------------------------- −0.3V to 6V
< 10ms----------------------------------------------------------------------------------------------------------------------- −0.3V to 7V
Output Voltage, VOUT --------------------------------------------------------------------------------------------------- −0.3V to 6V
Chip Enable Voltage, EN ------------------------------------------------------------------------------------------------ −0.3V to 6V
Adjust Voltage, ADJ ------------------------------------------------------------------------------------------------------ −0.3V to 6V
Power Good Voltage, V
PGOOD
------------------------------------------------------------------------------------------ −0.3V to 6V
Power Dissipation, P
D
@ T
A
= 25°C
SOP-8 (Exposed Pad) --------------------------------------------------------------------------------------------------- 2.96W
WDFN-10L 3x3 ------------------------------------------------------------------------------------------------------------- 2.95W
Package Thermal Resistance (Note 2)
SOP-8 (Exposed Pad), θ
JA
---------------------------------------------------------------------------------------------- 33.7°C/W
SOP-8 (Exposed Pad), θ
JC
--------------------------------------------------------------------------------------------- 5.4°C/W
WDFN-10L 3x3, θ
JA
------------------------------------------------------------------------------------------------------- 33.8°C/W
WDFN-10L 3x3, θ
JC
------------------------------------------------------------------------------------------------------- 8.9°C/W
Junction Temperature ----------------------------------------------------------------------------------------------------- 150°C
Lead Temperature (Soldering, 10 sec.)------------------------------------------------------------------------------- 260°C
Storage Temperature Range -------------------------------------------------------------------------------------------- −65°C to 150°C
ESD Susceptibility (Note 3)
HBM (Human Body Model)---------------------------------------------------------------------------------------------- 2kV
MM (Machine Model) ----------------------------------------------------------------------------------------------------- 200V
Recommended Operating Conditions (Note 4)
Supply Input Voltage, VIN ----------------------------------------------------------------------------------------------- 1V to 5.5V
Control Voltage, VDD (V
DD
> V
OUT
+ 1.5V) -------------------------------------------------------------------------- 3V to 5.5V
Junction Temperature Range-------------------------------------------------------------------------------------------- −40°C to 125°C
Ambient Temperature Range-------------------------------------------------------------------------------------------- −40°C to 85°C