3 07/12
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawing and pin configuration
Technical data and measuring conditions
Rated voltage V
R
500 V AC (50/60 Hz) / 600 V DC
During operation between winding and metal parts
(VDE 0565-2).
Test voltage V
test
2800 V AC, 2 s (winding/winding)
2800 V AC, 2 s (winding/core)
2800 V AC, 2 s (winding/case)
Rated temperature T
R
+60 C
Rated current I
R
Referred to 50 Hz and rated temperature
Permissible operating current at 400 Hz 0.75 · I
R
Rated inductance L
R
Measured with Agilent 4284A at 0.1 mA, +20 C
Measuring frequency: L
R
1 mH = 100 kHz
L
R
> 1 mH = 10 kHz
Inductance is specified per winding.
Inductance tolerance 20% at +20 C
DC resistance R
typ
Measured at +20 C, typical values, specified per winding
Solderability (lead-free) Sn96.5Ag3.0Cu0.5: +(245 5) °C, (3 0.3) s
Wetting of soldering area 95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
+(260 5) °C, (10 1) s
(to IEC 60068-2-20, test Tb)
Storage conditions (packaged) –25 °C … +40 °C, 75% RH
Climatic category 40/125/56 (to IEC 60068-1)
Weight Approx. 40 g
IND0460-Z-E
15±0.2
1.23.7
_
12.5+0.5
42.5±0.2
ø0.8
50 0.5
_
22.5 0.5
_
1
4
3
2
3
2
1
4
Tolerances to ISO 2768-C
unless otherwise noted.
Dimensions in mm
B82522VPower line chokes
I core double chokes
