OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

OP265WPS

P1-P3
Plastic Infrared Emitting Diode
OP265WPS
© TT electronics plc
Issue B 07/2016 Page 1
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Description:
The OP265WPS point source model is a flat-lensed 850 nm diode with a broad radiaon paern that provides relavely
even illuminaon over a large area. Its stable forward voltage (V
F
) vs. temperature characterisc makes this device
appropriate for applicaons where voltage is limited (such as baery operaon), while the low rise me/fall me (t
r
/t
f
)
makes it ideal for high-speed operaon.
OP265 devices conform to the OP505 and OP535 series devices.
Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data.
Applications:
• Space-limited applicaons
• Applicaons requiring coupling efficiency
• Precision opcal designs
• Baery-operated or voltage-limited
applicaons
Features:
• T-1 (3 mm) package style
• Broad irradiance paern
• Point source with flat lens
• Higher power output than GaAs at equivalent drive currents
• 850 nm diode
Ordering InformaƟon
Part
Number
LED Peak
Wavelength
Output Power (mW/cm
2
)
Min / Max
I
F
(mA)
Typ / Max
Total Beam
Angle
Lead
Length
OP265WPS 850 nm .055 / .55 20 / 50 120° 0.50"
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural failure in
OPTEK'S molded plascs.
Pin # LED
1 Cathode
2 Anode
1
2
INCHES
[MILLIMETERS]
DIMENSIONS ARE IN:
RoHS
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Plastic Infrared Emitting Diode
OP265WPS
Issue B 07/2016 Page 2
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Absolute Maximum Ratings (T
A
= 25° C unless otherwise noted)
Storage and Operang Temperature Range -40
o
C to +100
o
C
Reverse Voltage
2.0 V
Connuous Forward Current 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) 3.0 A
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C
(1)
Power Dissipaon 100 mW
(2)
Electrical Specifications
Electrical Characteristics
(T
A
= 25° C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
E
E (APT)
Apertured Radiant Incidence 2.70 - -
mW/cm
2
I
F
= 20 mA
(3)
V
F
Forward Voltage - - 1.80
V I
F
= 20 mA
I
R
Reverse Current - - 20
µA V
R
= 2 V
λ
P
Wavelength at Peak Emission - 850 -
nm I
F
= 10 mA
B
Spectral Bandwidth between Half Power
Points
- - -
nm I
F
= 20 mA
Input Diode
Notes:
1. RMA flux is recommended. Duraon can be extended to 10 second maximum when flow soldering. A maximum of 20 grams force may be
applied to the leads when soldering.
2. Derate linearly at 1.33 mW/° C above 25° C.
3. E
E(APT)
is a measurement of the average apertured radiant incidence upon a sensing area 0.081” (2.06 mm) in diameter, perpendicular to and
centered on the mechanical axis of the lens and 0.590” (14.99 mm) from the measurement surface. E
E(APT)
is not necessarily uniform within the
measured area.
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Plastic Infrared Emitting Diode
OP265WPS
Issue B 07/2016 Page 3
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Performance
Distance vs Power vs Forward Current
0
5
10
15
20
25
30
35
40
45
50
0.2 0.7 1.2 1.7
Distance (inches)
Normalized Output Power
10 mA
20 mA
30 mA
40 mA
50 mA
60 mA
80 mA
100 mA
Normalized at 1.0" and 20 mA
Forward Current
Forward Voltage vs Forward Current vs
Temperature
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0 102030405060708090100
Forward Current (mA)
Typical Forward Voltage (V)
-40° C
-20° C
0° C
20° C
40° C
60° C
80° C
100° C
120°C
OP265WPS
Optical Power vs Forward Current vs
Temperature
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0 102030405060708090100
Forward Current I
F
(mA)
Normalized Optical Power
-40° C
-20° C
0° C
20° C
40° C
60° C
80° C
100° C
120° C
Normalized at I
F
= 20mA at T
A
= 20°C, V
CE
= 5 V
P1-P3

OP265WPS

Mfr. #:
Buy OP265WPS
Manufacturer:
Optek / TT Electronics
Description:
Infrared Emitters Point Source 850nm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet