DS_PB01S/D_08232012 E-mail: DCDC@delta.com.tw
http://www.delta.com.tw/dcdc
Power Derating Curve
Output Power (%)
Output Power (%)
(3.3V, 5V & ±5V} (all other output)
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Ripple & Noise measurement bandwidth is 0-20MHz.
3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will
not damage these modules; however they may not meet all specifications listed.
4 All DC/DC converters should be externally fused at the front end for protection.
5 Specifications subject to change without notice.
Mechanical Drawing
Mechanical Dimensions Pin Connections
Pin Single Output Dual Output
1 +Vin +Vin
2 -Vin -Vin
4 -Vout -Vout
5 No Pin Common
6 +Vout +Vout
5V&12V Input:
T: 6.1mm(0.24 inch)
15V&24V Input:
T: 7.1mm(0.28 inch) for Models
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05 (±0.002)
Physical Outline
Case Size (5V&12V Input) : 19.5x6.1x10.2mm (0.77x0.24x0.40 Inches)
Case Size
(15V&24V Input)
: 19.5x7.1x10.2mm (0.77x0.28x0.40 Inches)
Case Material
Non-Conductive Black Plastic
(flammability to UL 94V-0 rated)
:
Weight (5V&12V Input) : 2.2g
Weight (15V&24V Input) : 2.6g
P4
3.2
[0.13]
10.2 [0.40]
19.5 [0.77]
T
0.50
[0.02]
Bottom View
18.5 [0.73]
0.5
[0.02]
2.35
[0.09]
2.54
[0.10]
2X2.54
[2X0.10]
0.5 [0.02]
5.08
[0.20]
0.25 [0.01]
1.3 [0.05]
12 456