OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

IHA501EB

P1-P3
IHA
www.vishay.com
Vishay Dale
Revision: 07-Aug-12
1
Document Number: 34014
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Filter Inductors, High Current, Axial Leaded
ELECTRICAL SPECIFICATIONS
Inductance: Measured at 1.0 V with zero DC current
Current Rating: Maximum continuous operating current
(DC or RMS) based on 50 °C temperature rise
Dielectric Rating: 2500 V
RMS
, 60 Hz, applied for one minute
between winding and outer circumference to within 0.250"
[6.35 mm] of the insulation sleeve edge
Operating Temperature: - 55 °C to + 125 °C (no load),
- 55 °C to + 75 °C (at full rated current)
FEATURES
• Printed circuit mounting (axial leads)
• Pre-tinned leads
• Low cost construction
• Protected by polyolefin tubing - flame retardant
UL type VW-1 per MIL-I-23053/8, class 3
requirements
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Noise filtering for switching regulators, power amplifiers,
power supplies, and SCR and triac control circuits
MECHANICAL SPECIFICATIONS
Winding: Layered solenoid type
Wire: Solid soft copper
Terminals: Tinned copper leads
Encapsulant: Polyolefin tubing
Core Material: Ferrite
DIMENSIONS in inches [millimeters]
MODEL A (MAX.) B (MAX.) C ± 0.002 [0.050]
IHA-101 0.475 [12.07] 0.800 [20.32] 0.032 [0.813]
IHA-102 0.475 [12.07] 0.800 [20.32] 0.032 [0.813]
IHA-103 0.475 [12.07] 1.050 [26.67] 0.032 [0.813]
IHA-104 0.550 [13.97] 1.050 [26.67] 0.032 [0.813]
IHA-105 0.550 [13.97] 1.175 [29.85] 0.032 [0.813]
IHA-201 0.500 [12.70] 0.800 [20.32] 0.032 [0.813]
IHA-202 0.500 [12.70] 0.800 [20.32] 0.032 [0.813]
IHA-203 0.500 [12.70] 0.920 [23.37] 0.032 [0.813]
IHA-204 0.600 [15.24] 0.920 [23.37] 0.032 [0.813]
IHA-205 0.750 [19.05] 1.050 [26.67] 0.032 [0.813]
IHA-301 0.475 [12.07] 0.800 [20.32] 0.032 [0.813]
IHA-302 0.475 [12.07] 0.920 [23.37] 0.032 [0.813]
IHA-303 0.550 [13.97] 0.800 [20.32] 0.032 [0.813]
IHA-304 0.550 [13.97] 0.920 [23.37] 0.032 [0.813]
IHA-305 0.550 [13.97] 1.175 [29.85] 0.032 [0.813]
IHA-501 0.475 [12.07] 1.050 [26.67] 0.040 [1.02]
IHA-502 0.475 [12.07] 1.050 [26.67] 0.040 [1.02]
IHA-503 0.700 [17.78] 1.050 [26.67] 0.040 [1.02]
IHA-504 0.700 [17.78] 1.050 [26.67] 0.040 [1.02]
IHA-505 0.700 [17.78] 1.300 [33.02] 0.040 [1.02]
STANDARD ELECTRICAL SPECIFICATIONS
MODEL IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA)
IHA-101 50 ± 10 % 0.120 2500
IHA-102 100 ± 10 % 0.160 2100
IHA-103 250 ± 10 % 0.280 1800
IHA-104 500 ± 10 % 0.420 1600
IHA-105 1000 ± 10 % 0.600 1400
0.125
[3.18]
Schematic
1.25 [31.75]
Min. Typ.
B
Max.
C Typ.
A Max.
IHA
www.vishay.com
Vishay Dale
Revision: 07-Aug-12
2
Document Number: 34014
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHA-201 27 ± 10 % 0.060 3700
IHA-202 50 ± 10 % 0.085 3100
IHA-203 100 ± 10 % 0.120 2700
IHA-204 250 ± 10 % 0.200 2400
IHA-205 500 ± 10 % 0.320 2300
IHA-301 5 ± 10 % 0.015 6800
IHA-302 10 ± 10 % 0.021 6100
IHA-303 27 ± 10 % 0.040 4800
IHA-304 50 ± 10 % 0.050 4300
IHA-305 100 ± 10 % 0.070 4200
IHA-501 5 ± 10 % 0.010 9300
IHA-502 10 ± 10 % 0.015 8300
IHA-503 27 ± 10 % 0.030 6500
IHA-504 50 ± 10 % 0.040 6100
IHA-505 100 ± 10 % 0.060 5900
MARKING
- Vishay Dale
- Model
- Date code
ORDERING INFORMATION
IHA-101
50 μH
± 10 % EB e2
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IHA101EB
MODEL PACKAGE
CODE
STANDARD ELECTRICAL SPECIFICATIONS
MODEL IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA)
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3

IHA501EB

Mfr. #:
Buy IHA501EB
Manufacturer:
Vishay / Dale
Description:
Fixed Inductors IHA-501 EB E3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet