Cooling Products Ventilation
Door Stop Kit Drip Shield Kit
Door Support Guide Filtered Fans
Heaters Inner Panels
Lighting Panel Rails
Swing Out Frames Temperature Controls
Window Kits Ground Wire Kits
Type 4X Stainless Steel Freestanding Enclosure
1418 N4 FS SS Series
Continuous Hinge Door with Clamps
Application
Designed to house electrical, electronic, hydraulic or pneumatic controls
with provision for panel mounting or rack mounting of equipment.
Provides protection where equipment may be hosed down or otherwise be
very wet, or in specific applications where corrosion is a serious problem.
A variety of inner panels, rack mounting rails and swing out frames are
available to provide flexibility in mounting arrangements.
Standards
UL 508 Type 3R, 4, 4X and 12
CSA Type 3R, 4, 4X and 12
Complies with
NEMA Type 3R, 4, 4X, 12 and 13
IEC 60529, IP66
Construction
Formed 12 gauge 304 or 316 stainless steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Heavy duty stainless steel lifting eyebolts are provided with reinforcing
support angles.
Doors are supported with heavy gauge continuous hinges.
Doors are secured with heavy duty stainless steel clamps.
Seamless poured-in place gasket.
Mounting channels are welded on the inside of the enclosure for mounting
of optional inner panels or rack equipment rails.
A grounding stud is provided in the enclosure and a bonding stud is
provided on the door.
Finish
Cover and enclosure are natural stainless steel with a smooth brushed
finish.
Optional inner panels are finished in white powder paint.
Accessories
Quality Products. Service Excellence.
