10380-3280-000-0

3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon (MDR) Connectors
.050 Plastic Shielded Junction Shell for Round Cable 103 Series
Physical
Outer Shell
Material:
Copolyester Elastomer
Flammability:
UL 94V-0
Color:
See Ordering Information
Inner Shell
Material:
Steel, .02 [ 0.5 ] Thick
Plating:
Nickel
Marking:
3M Logo
Durable two piece plastic over two piece metal
junction shell for straight round cable (compatible
with 101XX-6000 EC plug)
Quick release latching
Contacts: 50, 68 and 80
See Regulatory Information Appendix (RIA) for
chemical compliance information.
TS-0534-B
Sheet 1 of 2
Date Modified: December 10, 2007
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon (MDR) Connectors
.050 Plastic Shielded Junction Shell for Round Cable 103 Series
Contact
Quantity
Dimensions
ABCD
50 1.66 [ 42.3 ] 1.96 [ 49.9 ] 1.57 [ 40.0 ] .68 [ 17.4 ]
68 2.11 [ 53.6 ] 2.41 [ 61.3 ] 2.02 [ 51.4 ] .68 [ 17.4 ]
80 2.41 [ 61.2 ] 2.66 [ 67.7 ] 2.32 [ 59.0 ] .79 [ 20.2 ]
TS-0534-B
Sheet 2 of 2
Ordering Information
Note:
1. Part number includes a cable clamp and two M2.6 screws. These parts are not shown.
2. Panel thickness (including washers) 2.0 mm max.
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dimensions for Reference
Onl
y
Tolerance Unless Noted
[mm]
Inch
Cable Exit Inside Diameter of Bushing (Dim E)
0 = 10.0 mm
1 = 11.0 mm
Contact Quantity
(See Table)
103XX-3280-00X-X
Plastic Outer Shell
Assembly
E Dia
See Note 1
Upper Half
Metal Inner Shell
.81
[ 20.5 ]
.36
[ 9.1 ]
.40
[ 10.1 ]
.52
[ 13.2 ]
.49
[ 12.4 ]
1.65
[ 42.0 ]
Lower Half
Metal Inner Shell
A
.83
[ 21.1 ]
.45
[ 11.5 ]
1.30
[ 33.0 ]
Cable Exit
Parts ( 2 )
Body
B
D
C
1.08
[ 27.5 ]
Cover
(See ordering information
below.)
Shell Color
0 = Beige (Standard)
3 = Gray (Special Order - 50 pos. only)
6 = Black (Special Order - 80 pos. only)
(RIA E1 & C1 apply)
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c

10380-3280-000-0

Mfr. #:
Manufacturer:
3M
Description:
D-Sub Backshells 80P SHLD JUNC SHELL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union