DO NOT
SCALE FROM
THIS PRINT
SMS-1XX-XX-XX-D
No OF POSITIONS
-01 THRU -50 POSITIONS
ROW SPECIFICATION
-D:DOUBLE ROW (USE SMS-50-D)
LEAD STYLE
(SEE TABLE 1)
USE SPECIFIED LEAD STYLE TO
IDENTIFY CONTACT
PLATING SPECIFICATION
-G: 10µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
(AVAILABLE IN -01 LEAD STYLE ONLY)
-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
-TM: MATTE TIN CONTACT AND TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
(AVAILABLE IN -01 LEAD STYLE ONLY)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
.016 0.41
REF (TYP)
.335 8.51
REF
.050 1.27
2
MAX SWAY
(EITHER DIRECTION)
"A"
"A"
C-16-X-XX
SMS-50-D
C
((NO OF POS x .0500[1.27]) + .009[0.23])
.007[0.18]
(SEE NOTE 4)
.220 5.59
REF
01
02
99
100
C
"B"±.005[0.13]
(SEE TABLE 1)
.020 0.51
REF (TYP)
.100 2.54
SECTION "A"-"A"
C
C
PACKAGING VIEW
(SEE TABLE 2 & NOTE 5)
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.050[1.27] CENTERLINE SOCKET MICRO STRIP
BY:
SMS-1XX-XX-XX-D
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRYANT
04/09/1991
1
1
SHEET SCALE: 4:1
INSULATOR: VECTRA E130I, COLOR: BLACK
CONTACT: PHOSPHOR BRONZE, SPRING TEMPER,
ALLOY 511 OR 510
C:\EnterpriseVault\DWG\MISC\MKTG\SMS-1XX-XX-XX-D-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE BOW: .006[0.15] INCH/INCH AFTER ASSEMBLY.
3. MAXIMUM CUT FLASH: .005[0.13].
4. PARTS CUT TO POSITION SHOULD BE SYMMETRICAL ABOUT
C
L
. MINIMUM END WALLS
OF CUT BODIES SHALL BE .012 [0.30]. WHEN MEASURED AT CONTACT TAIL.
5. PACKAGE ONLY POSITIONS 10 THROUGH 50 IN TUBES. BOX PACKAGE
POSITIONS 01 THROUGH 09.
6. MINIMUM CONTACT PUSHOUT FORCE: 1.5 LBS.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION Y
