Type 4X Aluminum Wallmount Enclosure
1418 N4 AL
Series
Continuous Hinge Door with Clamps
Application
Designed for use as instrument enclosures, electric, hydraulic or pneumatic
control housings, electrical junction boxes or terminal wiring enclosures.
Provides protection where equipment may be hosed down or otherwise be
very wet, or in specific applications where corrosion may be a problem.
Standards
UL 508 Type 4, 4X, 12 and 13
CSA Type 4, 4X, 12 and 13
Complies with
NEMA Type 4, 4X, 12 and 13
JIC EGP-1-1967
IEC 60529, IP66
Construction
Formed from 0.081" (Body) / 0.100" (Door) Type 5052 H-32 aluminum.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Door and body stiffeners are provided in the larger enclosures for extra
rigidity.
Welded brackets provide for enclosure mounting.
Formed lip on door and enclosure excludes flowing liquids and
contaminants.
Aluminum continuous hinge on door may be removed by pulling the
aluminum hinge pin.
Door is secured with easily operated aluminum clamps.
Provision for padlocking.
Seamless poured-in place gasket.
A removable 12 gauge steel inner panel is included.
Collar studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in
the enclosure.
A literature pocket is provided for the inside of the door.
Finish
Cover and enclosure are natural unfinished aluminum.
Removable inner panel is finished in white powder coating.
Accessories
Quality Products. Service Excellence.
