HFBR-0501 Datasheet HFBR-2524, HFBR-1537, HFBR-2521 | P1-P3

Features

• Low cost fiber optic components

• Enhanced digital links dc-5 MBd

• Extended distance links up to 120 m at 40 kBd

• Low current link: 6 mA peak supply current

• Horizontal and vertical mounting

• Interlocking feature

• High noise immunity

• Easy connectoring Simplex, Duplex, and Latching

connectors

• Flame retardant

• Transmitters incorporate a 660 nm Red LED for easy

visibility

• Compatible with standard TTL circuitry

Applications

• Reduction of lightning/voltage transient susceptibility

• Motor controller triggering

• Data communications and local area networks

• Electromagnetic Compatibility (EMC) for regulated

systems: FCC, VDE, CSA, etc.

• Tempest-secure data processing equipment

• Isolation in test and measurement instruments

• Error free signalling for industrial and manufacturing

equipment

• Automotive communications and control networks

• Noise immune communication in audio and video

equipment

Description

The Versatile Link series is a complete family of fiber

optic link components for applications requiring a low

cost solution. The HFBR-0501 series includes

transmitters, receivers, connectors and cable specified

for easy design. This series of components is ideal for

solving problems with voltage isolation/insulation,

EMI/RFI immunity or data security. The optical link design

is simplified by the logic compatible receivers and

complete specifications for each component. The key

optical and electrical parameters of links configured with

the HFBR-0501 family are fully guaranteed from 0° to

70°C.

A wide variety of package configurations and connectors

provide the designer with numerous mechanical solutions

to meet application requirements. The transmitter and

receiver components have been designed for use in high

volume/low cost assembly processes such as auto

insertion and wave soldering.

Transmitters incorporate a 660 nm LED. Receivers

include a monolithic dc coupled, digital IC receiver with

open collector Schottky output transistor. An internal

pullup resistor is available for use in the HFBR-25X1/2/4

receivers. A shield has been integrated into the receiver

IC to provide additional, localized noise immunity.

Internal optics have been optimized for use with 1 mm

diameter plastic optical fiber. Versatile Link specifications

incorporate all connector interface losses. Therefore,

optical calculations for common link applications are

simplified.

HFBR-0501 Series

Versatile Link

The Versatile Fiber Optic Connection

Data Sheet

HFBR-0501 Series Part Number Guide

HFBR X5XX

1 = Transmitter

2 = Receiver

5 = 600 nm Transmitter and

Receiver Products 1 = 5 MBd High Performance Link

2 = 1 MBd High Performance Link

3 = 40 kBd Low Current/Extended Distance Link

2 = Horizontal Package 4 = 1 MBd Standard Link

3 = Vertical Package 6 = 155 MBd Receiver

7 = 155 MBd Transmitter

8 = 10 MBd High Performance Link

Evaluation Kit

HFBR-0501 1 MBd Versatile Link:

This kit contains: HFBR-1524 Tx, HFBR-2524 Rx,

polishing kit, 3 styles of plastic connectors, Bulkhead

feedthrough, 5 meters of 1 mm diameter plastic cable,

lapping film and grit paper, and HFBR-0501 data sheet.

Application Literature

Application Note 1035 (Versatile Link)

VALOX

is a registered trademark of the General Electric Corporation.

Package and Handling Information

The compact Versatile Link package is made of a flame

retardant VALOX

UL 94 V-0 material (UL file # E121562)

and uses the same pad layout as a standard, eight pin

dual-in-line package. Vertical and horizontal mountable

parts are available. These low profile Versatile Link

packages are stackable and are enclosed to provide a

dust resistant seal. Snap action simplex, simplex

latching, duplex, and duplex latching connectors are

offered with simplex or duplex cables.

Package Orientation

Performance and pinouts for the vertical and horizontal

packages are identical. To provide additional attachment

support for the vertical Versatile Link housing, the

designer has the option of using a self-tapping screw

through a printed circuit board into a mounting hole at

the bottom of the package. For most applications this is

not necessary.

Package Housing Color

Versatile Link components and simplex connectors are

color coded to eliminate confusion when making

connections. Receivers are blue and transmitters are

gray, except for the HFBR-15X3 transmitter, which is

black.

Link Selection Guide

(Links specified from 0 to 70°C, for plastic optical fiber unless specified.)

Signal Rate Distance (m) 25°C Distance (m) Transmitter Receiver

40 kBd 120 110 HFBR-1523 HFBR-2523

1 MBd 20 10 HFBR-1524 HFBR-2524

1 MBd 55 45 HFBR-1522 HFBR-2522

5 Mbd 30 20 HFBR-1521 HFBR-2521

Handling

Versatile Link components are auto-insertable. When

wave soldering is performed with Versatile Link

components, the optical port plug should be left in to

prevent contamination of the port. Do not use reflow

solder processes (i.e., infrared reflow or vapor-phase

reflow). Nonhalogenated water soluble fluxes

(i.e., 0% chloride), not rosin based fluxes, are recom-

mended for use with Versatile Link components.

Versatile Link components are moisture sensitive

devices and are shipped in a moisture sealed bag. If the

components are exposed to air for an extended period

of time, they may require a baking step before the

soldering process. Refer to the special labeling on the

shipping tube for details.

Recommended Chemicals for Cleaning/Degreasing

Alcohols: methyl, isopropyl, isobutyl. Aliphatics: hexane,

heptane, Other: soap solution, naphtha.

Level

CAUTION

This bag contains

MOISTURE-SENSITIVE

DEVICES

1. Shelf life in sealed bag: 12 months at < 40°C and < 90% Relative

Humidity (RH).

2. After this bag is opened, devices that will be subjected to wave

soldering, or equivalent processing (solder temperature < 260°C for

10 sec) must be:

a) Mounted within 72 hours at factory conditions of ≤ 30°C/60% RH.

b) Stored at ≤ 20% RH.

3. Devices require baking, before mounting, if:

a) Desiccant changes to PINK.

b) If 2a or 2b are not met.

4. If baking is required, devices may be baked outside of tube for 20

hours at 75°C.

Bag Seal Date: ______________________________________________________

(If blank, see barcode label)

Note: LEVEL defined by EIA JEDEC Standard J-STD-020

6.8

(0.270)

10.2

(0.400)

4.2

(0.165)

1.27

(0.050)

2.5

(0.100)

0.51

(0.020)

18.8

(0.740)

2.0

(0.080)

7.71

(0.305)

0.64

(0.025)

7.62

(0.300)

2.8

(0.109)

1.85

(0.073)

0.64 (0.025) DIA.

5.1

(0.200)

3.81 (0.150) MAX.

3.56 (0.140) MIN.

18.8

0.740

7.6

(0.30)

7.6

(0.30)

Do not use partially halogenated hydrocarbons such as

1,1.1 trichloroethane, ketones such as MEK, acetone,

chloroform, ethyl acetate, methylene dichloride, phenol,

methylene chloride, or N-methylpyrolldone. Also, Avago

does not recommend the use of cleaners that use

halogenated hydrocarbons because of their potential

environmental harm.

Mechanical Dimensions

Horizontal Modules Vertical Modules

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P19

HFBR-0501

Mfr. #:

Buy HFBR-0501

Manufacturer:

Broadcom / Avago

Description:

KIT EVAL FIBER OPTIC 5MBD

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HFBR-0501

HFBR-0501

Products related to this Datasheet