______________________________________________________________________________________________________________________________ 1 of 3
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
Specifications
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
AC Input 100-240VAC, +/-10%, 47-63 Hz single phase MTBF >100,000 hours (calculated)
Input Current 115VAC: 4A max, 230VAC: 1.5A max Hold-up Time 21 ms min. @ 100VAC
Inrush Current 75A max. @ 264VAC, Cold Start Overvoltage Protection 130% of nominal output voltage
Input Fuses Internal 6.3A Primary Current Fuses are provided Overload Protection 110-150% of full rated load, auto-recovery
PFC, Harmonics IEC61000-3-2 Short Circuit Protection Hiccup Mode, auto-recovery
Earth Leakage Current <350µA typical @264VAC, 50Hz Switching Frequency 50-120kHz, variable
Efficiency 88% typical Medical Safety Standards EN/IEC/UL60601-1
No Load Power <0.5W ITE Safety Standards EN/IEC/UL60950-1
Transient Response 5ms max. for 50% load step
Max deviation is 5%
Isolation: Input-Output: 4KVac, Input-GND: 1.5KVac
Output-GND: 700Vdc
Output Voltage See chart
Operating Temp. 0° - 70°C, derate above 40°C to
60% of full rated load at 70°C
Line Regulation: +/-0.5% max
Storage Temperature -20 to +85°C
Load Regulation +/-3% max Relative Humidity 5% to 95%, non-condensing
Minimum Load Not required Altitude 0 to 10,000 ft
Ripple and Noise 1% pk-pk max., 20MHz BW, differential mode Case Material Black 94V-0 rated Polycarbonate
Turn-on Time 3 sec. maximum @ 115VAC Case Dimensions Desktop Style: 8.4” x 4.25” x 1.85”
Output Connections See chart and outline drawing Weight 1200g
MENT1220
Universal 220 Watt Series
Medical Switch-Mode Power Supply
3Year Warranty
•
Universal Input 100Vac – 240Vac
•
12V to 48V Single Output Models up to 220W
•
Desktop Style/Non-vented case - No internal fan!
•
Ribbed Case Surface to improve cooling
•
Energy Star 2.0, Level V
•
Certified to Medical (UL/IEC/EN60601-1) and
ITE (UL/IEC/EN60950-1) Standards
•
IPX1 Rated Enclosure
•
Class I and Class II input versions available.
•
Modified and Custom Designs