2SB315A-2MBI800U4G-120

2SB315A
IGBT-Driver.com Page 1
Data Sheet
2SB315A-2MBI800U4G-120
SCALE Dual-Channel Plug-and-Play Driver
Driver solution for 130mm x 140mm dual IGBT modules with
electrical interface for 2-level topologies
Abstract
The 2SB315A-2MBI800U4G-120 is a dual-channel driver with an electrical interface
based on CONCEPT’s dual SCALE driver 2SD315AI, a proven technology for reliable
driving and safe operation of IGBTs.
The driver is matched to the 1200V module 2MBI800U4G-120 from Fuji. Its plug-and-
play capability makes it ready to operate immediately after mounting. The user needs
invest no effort in designing or adjusting it to a specific application.
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer
to www.IGBT-Driver.com/go/plug-and-play
Product Highlights Applications
Suitable for 2MBI800U4G-120 Inverters
Plug-and-play solution Motor drives
Active clamping of V
ce
at turn-off UPS
IGBT short-circuit and overcurrent protection Power-factor correctors
No electrolytic capacitors Wind-power converters
20-pin flat cable interface Welding
Monitoring of power supply voltage SMPS
Duty cycle 0... 100% and many others
Extremely reliable; long service life
Shortens application development time
2SB315A
Data Sheet 2SB315A-2MBI800U4G-120
Page 2 INTELLIGENT POWER ELECTRONICS
Important: Please refer to the relevant manuals!
This data sheet contains only product-specific data. A detailed description,
must-read application notes and general data applicable to this driver
family are found in: “Description and Application Manual for 2SB315A
SCALE Plug-and-play IGBT Driver”.
See www.IGBT-Driver.com/go/2SB315A
Dimensions
Dimensions: 130 x 145 mm, 21 mm height (30 mm with connector X1 and flat cable).
Mounting principle: Connected to IGBT module with screws.
Absolute Maximum Ratings
Parameter Remarks Min Max Units
Supply voltage V
DC
VDC to GND (Note 1) 0 16 V
Supply voltage V
DD
VDD to GND 0 16 V
Logic input voltage To GND 0 V
DD
V
Gate peak current I
out
Note 6 -15 +15 A
Average supply current I
DC
Notes 2,3 500 mA
Output power per gate Note 3 3 W
Switching frequency Note 3 15 kHz
DC-link voltage Note 4 800 V
Operating temperature Note 3 -40 +85 °C
Storage temperature -40 +90 °C
All data refer to +25°C and V
DC
= 15V unless otherwise specified
2SB315A
Data Sheet 2SB315A-2MBI800U4G-120
IGBT-Driver.com Page 3
Electrical Characteristics
Power supply Remarks Min Typ. Max Units
Nominal supply voltage V
DC
To GND (Note 1) 15 V
dc
Supply current I
DC
Without load 80 mA
Supply current I
DC
At 15 kHz switching frequency 470 mA
Efficiency η Internal DC/DC converter 85 %
Nominal supply voltage V
DD
To GND 15 V
dc
Supply current I
DD
Without load 10 mA
Supply current I
DD
At 15 kHz switching frequency 12 mA
Power supply monitoring Test conditions Min Typ. Max Units
Turn-on threshold V
th
Note 5 10.6 V
dc
Hysteresis on/off Note 5 0.6 V
dc
Short circuit protection Remarks Min Typ. Max units
V
ce
-monitoring threshold Betw. aux. terminals 4.3 V
Response time Note 7 9 µs
Blocking time After failure (Note 8) 1 s
Logic inputs Test conditions Min Typ. Max Units
Input voltage All inputs 0 V
DD
V
dc
Timing characteristics Test conditions Min Typ. Max Units
Turn-on delay t
pd(on)
Note 9 400 ns
Turn-off delay t
pd(off)
Note 9 500 ns
Output rise time t
r(out)
Gx to Ex (Note 10) 150 ns
Output fall time t
f(out)
Gx to Ex (Note 10) 80 ns
Dead time between outputs Half-bridge mode 2.5 µs
Outputs Test conditions Min Typ. Max Units
Turn-on gate resistor R
g(on)
5.6
Turn-off gate resistor R
g(off)
8.2
Output current SOx 1.5 mA
Output voltage rating SOx SOx to GND V
DD
V

2SB315A-2MBI800U4G-120

Mfr. #:
Manufacturer:
Power Integrations
Description:
Power Management Modules 2SB315A PI Gate Driver ONLY
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet