AA-150-24-44-00-XX Datasheet AA-150-24-44-00-XX | P1-P3

AA-150-24-44-00-XX

Outdoor Thermoelectric Cooler Assemblies

Page 1 of 3

The AA Outdoor Cooler Series is an Air-to-Air thermoelectric assembly (TEA)

that uses impingement flow to transfer heat. It offers dependable, compact

performance by cooling objects via convection. Heat is absorbed and

dissipated thru high density heat exchangers equipped with air ducted

shrouds and brand name fans. The heat pumping action occurs from custom

designed thermoelectric modules that achieve a high coefficient of

performance (COP) to minimize power consumption.

This product series has been designed to pass rigorous Telcordia test

requirements conducted by our customers, such as earthquake resistance,

salt fog, wind-driven rain, high temperature exposure and dust contaminants.

This is due to the selection of world class components such as brand fans with

the highest degree of environmental protection and lifetime guaranteed

waterproof connectors, heavy duty anodization on the high-density heat

sinks, overheat protection, and double environmental seals for the

thermoelectric modules.

Americas: +1.919.597.7300

Europe: +46.31.420530

Asia: +86.755.2714.1166

ets.sales@lairdtech.com

www.lairdtech.com

FEATURES AND BENEFITS

• 150W capacity rated at ΔT = 0°C, Tambient = 32°C

• Wide operating temperature range of -40°C to +55°C

• Telcordia GR-487-CORE tested and verified by customers when integrated

in telecom outdoor enclosures

• Gaskets, connectors, and fans provide a NEMA 4 seal for the enclosure

• UL60950 and UL50 approval obtained by customers when integrated in

telecom outdoor enclosures

• Environmentally friendly solid state operation - no compressor or CFC

refrigerants

• Cooling and heating in the same unit; optional temperature controller

reverses the polarity of current to generate heating

APPLICATIONS

• Outdoor telecom enclosures

• Outdoor kiosks and displays

• Harsh condition electronic cabinets

• Battery cabinets

PERFORMANCE Qc VS ΔT

AA-150-24-44-00-XX

Page 2 of 3

SPECIFICATION AA-150-24-44-00-XX

Technical

Technology

Thermoelectric (TE) modules, forced air, closed loop (non-mixing), filterless,

non-refrigerant

Cooling at dT = 0°C, and nominal / float voltage.

143/159W (488/543 Btu/h)

Heating

150W (512 Btu/h)

Voltage (nominal / maximum)

24/28 VDC

Grounding (all voltages)

Positive or negative

Current draw, ±10% (nominal / startup)

7.9/10.0 A (24V version)

Weight

5.1 kg (11.2 lbs)

Panel mounting

Through

Fan life (L

at +40°C)

≥70,000 hours

Number of connectors 3

Connector type

(on unit / mating side)

On unit: AMP part number: 350777-1, 794269, 350547-6, 794270-1

Mating side: AMP part number : 350778-1, 350550-6, 794270-1

Hi-pot testing

707 VDC

Environmental

Temperature range

(external ambient)

-40°C to +55°C (-40°F to +131°F)

Temperature range (internal enclosure)

-20°C to +55°C (-4°F to +131°F)

Overheating thermostat

80°C ± 3°C (Hot and cold side heat sink surfaces)

Degree of protection, enclosure

NEMA 4 (IP55)

Degree of protection, unit

IP54

Sound level (1m distance) 58 dB(A)

Over-Temp Thermostat (Hot and cold side heat sink)

80°C ± 3°C

1) Cooling capacities at nominal / float voltage are rated at external temperatures of 32°C and 46°C respectively. Float voltage is defined at 27 VDC.

2) Heating capacity is rated at external temperature of -40°C, nominal voltage, and dT = -45°C.

3) Controller function shall not operate the external fan during heating mode.

4) The highest environmental protection level requires an external shroud and is defined as the protection level for the enclosure.

5) Rating for unit without protective shroud.

Note: The specified performance of any Laird Technologies cooling unit is dependent on how it is handled and incorporated into the final

product. This includes elements such as the system design, insulation design, and assembly method. While Laird Technologies is able to

provide general guidelines based upon our experience, it is ultimately the responsibility of the device manufacturer to validate each

product and its performance for its intended use.

ISOMETRIC DRAWINGS

AA-150-24-44-00-XX

Page 3 of 3

MOUNTING HOLE LOCATION

WIRING SCHEMATIC

Electrical connections

K1 Power to TEM Array (Operate in Cooling Mode)

P1 Positive (Red) Marked +24 VDC

P2 Negative (Black)

K2 Power to Exterior Fan (Hot Side)

P1 Positive (Orange) +24 VDC

P2 Negative (White)

K3 Power to Interior Fan (Cold Side)

P1 Positive (Green)

P2 Negative (White)

LAIRD-ETS-AA-150-24-44-00-XX-DATA-SHEET-100616

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to

change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies

makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any

specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies

products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished

marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may

be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.

P1-P3

AA-150-24-44-00-XX

Mfr. #:

Buy AA-150-24-44-00-XX

Manufacturer:

Laird Thermal Systems

Description:

Thermoelectric Assemblies 143W 24VDC 7.9A -40C to+55C NEMA 4

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

AA-150-24-44-00-XX