DO NOT
SCALE FROM
THIS PRINT
TSS-1XX-XX-XXX-X-XX-XX
No OF POSITIONS
-02 THRU -18 &
20, 21, 24, 25, 28, 30, 32, 36
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE
-S: SINGLE
LEAD STYLE
SEE TABLE 1
PLATING SPECIFICATION
POLARIZE OPTION
XX INDICATES POSITION OMITTED
OPTION
BLANK: STRAIGHT (STYLE 04 & 05 N/A)
-RA: RIGHT ANGLE (STYLE -01, -02 & -03 N/A)
-LL: LOCKING LEAD
-LA: -RA OPTION WITH -LL OPTION
C
-G: GOLD, 10µ'' Au / 50µ'' Ni NICKEL MIN ON CONTACT, 3µ'' AU / 50µ'' NI MIN ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-S: SELECTIVE, 30µ'' Au / 50µ'' Ni MIN ON CONTATCT, MATTE TIN TAIL
-L: LIGHT SELECTIVE, 10µ'' Au / 50µ'' Ni MIN ON CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD, 30µ'' Au / 50µ'' Ni MIN ON CONTACT, 3µ'' Au / 50µ'' Ni MIN ON TAIL
-F: FLASH SELECTIVE, 3µ'' Au / 50µ'' Ni MIN ON CONTACT, MATTE TIN TAIL
-STL: SELECTIVE, 30µ'' Au / 50µ'' Ni MIN ON CONTACT, TIN/LEAD (90/10+/-5%) TAIL
(AVAILABLE IN -01 STYLE ONLY)
-SS: STRIPE SELECTIVE, 30µ'' Au / 50µ'' Ni MIN ON CONTACT, MATTE TIN TAIL (SEE NOTE 7)
.100
REF
2.54
.250
6.35
REF
.365 9.27
REF
.100
REF
2.54
01 03
02 04
(N/A ON SINGLE ROW -02 THRU -05 POSITIONS)
.16 [4.1] (-02 & -03 POSITIONS) REF
.20 [5.1] (-04 THRU -36) REF
.350
REF
8.89
.015
REF
0.38
FIRST POSITION
INDICATOR
TSS-XX-X
.04 1.0
(TYP)
"A"
-
.000
+
.010
.165
REF
4.19
(GOLD PLATE)
(SEE NOTE 3)
'CRIMP'
STRAIGHT
(-LL IS SHOWN FOR DIMENSIONAL PURPOSES)
C
C
.017
MIN
0.43
.0080 0.203
DETAIL 'CRIMP'
SCALE 8 : 1
(TYP ALL CRIMPS)
+.050[1.27] REF
NO OF POS X .100[2.54]
+.150[3.81] REF
NO OF POS X .100[2.54]
.150 3.81
REF
.265 6.73
REF
01 02
"A"
-
.000
+
.010
.250 6.35
REF
.165
REF
4.19
(GOLD PLATE)
(SEE NOTE 3)
.04 1.0
(TYP)
TERMINAL 1
(SEE TABLE 1)
C
C
C
SEE NOTE 4
TERMINAL 1
(SEE TABLE 1)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
SLIM TOP SHROUD TERMINAL STRIP
BY:
TSS-1XX-XX-XXX-X-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
JORDAN
01/23/1990
2
1
SHEET SCALE: 2:1
INSULATOR: PBT, UL 94 VO, COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\TSS-1XX-XX-XXX-X-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 3 LB.
3. ASSEMBLE GOLD PLATED END AS SHOWN.
4. TERMINALS TO BE FLUSH TO .010 [.25] BELOW TOP OF SHROUD.
5. TSS-1XX-04-X-D-RA-XX ASSEMBLIES ARE TO BE PACKAGED IN A PT-1-24-01-40
TUBE WITH TWO TP-13 PLUGS PER TUBE (ALL POSITIONS).
6. ORIENTATE PINS TO REDUCE THE NUMBER OF BANDOLIER MARKS
IN THE POST AREA (SEE TABLE 2).
7. AVAILABLE ON STRAIGHT LEAD STYLES -01, -02, -03 AND ON –RA LEAD STYLE
-04. MATES WITH SSW, SSQ, SSM, BCS, ESW & ESQ ONLY.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION AE
