■
STANDARD SPECIFICATIONS
P-7100
PRESSURE TRANSDUCERS
Item Model number
P-7100
102G 103G 102R 132A
General specifications
Pressure reference
Gauge Absolute
Ratedpressure range
0 ~ 100kPa 0 ~ 1.0MPa -100 ~ 100kPa 0 ~ 133.3kPa abs
Maximum pressure
200kPa 2.0MPa 200kPa 200kPa abs
Break-down pressure
300kPa 3.0MPa 300kPa 300kPa abs
Operating temp.range
− 20
~
70
Compensated temp. range
0 ~ 50
Operating humidity range
35 ~ 85
（
No condensation
）
Storage temp. range
− 20 ~ 80
（
Atmospheric pressure, humidity 65
%
RH maximum
）
Media
Corrosive gases/liquids compatible with SUS316L and SUS304
Insulation resistance
100
（
500V DC
）
Dielectric strength
500V AC 60 s（Leakage current 1mA maximum）
Sealed liquid
Silicone oil
Pressure port
R1/8, M5（SUS304）
Net weight
R1
：Approx.
22, M5
：Approx.
19
Voltage
Operating voltage
5±0.5
Current consumption
3
Analog output
Output voltage ※
0.5 ~ 4.5
Output limit
16.5mV ~ 95% Vopr
Zero voltage ※
0.5±0.04 2.5±0.04 0.5±0.1
Span voltage ※
4.0±0.04 4.0±0.1
Output current
1（
Load resistance 5kї minimum）
Linearity / Hysteresis
±0.5
Thermal error
(Reference temp.25°C)
Zero
±0.05 ±0.06
Span
±0.05 ±0.06
Response time
Approx.2
Gravitational
（From horizontal position to vertical position）
±0.3 ±0.05 ±0.3 ±0.3
■
ENVIRONMENTAL CHARACTERISTICS
Test item Test conditions Permissible change
Analog output (Vzero, Vspan)
± 1 %F.S. maximum each after test
Vibration
10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s2,
3 directions for 2 hours each
490 m/s2, 3 directions for 3 times each
0 ~ Rated pressure, 10
6
cycles
40 °C, 90 ~ 95 %RH, 240 hrs.
Shock
Pressure cycling
Moisture resistance
※
Output voltage is proportional to the operating voltage.(ratiometric output) The resolving power of the analog output is 11 Bits (about 0.002V/0.05%F.S).
°C
°C
%RH
°C
M
ї
minimum
mA
Maximum
mA
Maximum
g
V DC
V
V
V
ms
%F.S./°C
%F.S./°C
%F.S.
%F.S.
