TC650/TC651
DS21450D-page 6 2001-2012 Microchip Technology Inc.
3.0 PIN DESCRIPTION
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
3.1 Power Supply Input
May be independent of fan power supply.
3.2 Fan Shutdown, Active-low Input
During Shutdown mode, the chip still monitors
temperature. T
OVER
is low if temperature rises above
factory set point.
3.3 Ground
Ground return for all TC650/TC651 functions.
3.4 Overtemperature Alert
Active-low output.
3.5 PWM Fan Drive Output
Pulse width modulated rail-to-rail logic output. Nominal
frequency is 15 Hz.
Pin No. Symbol Description
1V
DD
Power Supply Input
2 NC No Internal Connect
3 SHDN Fan Shutdown, Active-low Input
1 = Fan in normal operation
0 = Fan in shutdown
4 GND Ground
5 NC No Connect
6 T
OVER
Overtemperature Alert, Active-low Output
1 = Overtemperature condition does not exist
0 = The device is in the overtemperature condition. The fan is driven at 100%.
Potential exists for system over-heating
7 GND Ground
8 PWM PWM Fan Drive Output