THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DESIGNED & DIMENSIONED
IN MILLIMETERS
DO NOT
SCALE FROM
THIS PRINT
FJH-XX-X-XX.XX-X
No OF POSITIONS
-06, -10, -15, -20, -24,
-25, -30, -40, -43, 50
(SEE TABLE 1)
STYLE
*-S: SINGLE ENDED
-D: DOUBLE ENDED
-R: REVERSE STIFFENER
LENGTH
-XX.XX INCHES
.125 INCH
(-D & -R: 2.00 MINIMUM)
(-S: 2.50 MINIMUM)
STRIP LENGTH
-4: 4MM
0.50
-
0.10
+
0.15
(SEE NOTE 4)
(SEE NOTE 3)
LENGTH
.125
"A"±0.08
(SEE TABLE 1)
4.00±0.38
FC-XX-0.5
C
0.12
S
-S-
"B"
0.50
C
0.32
REF
0.53 REF
0.10 REF
0.315
+
-
0.035
0.065
5.25 REF
3.40 MIN
FS-20
C
-Z-
* = AS OF 1/1/11, -S (SINGLE ENDED) AVAILABLE TO EXISTING
CUSTOMERS ONLY, ALL OTHERS WILL BE ASP`S.
C
-S: SINGLE ENDED
(FJH-10-S-XX.XX-4 SHOWN)
(HAND BUILT)
FIG 1
CPC
THIS SHEET
C1, C2, C8
SHEET OF
MATERIAL:
.5mm FLEX CABLE JUMPER
BY:
FJH-XX-X-XX.XX-X
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
KEVIN B
6/28/00
3
1
SHEET SCALE: 6:1
CONDUCTORS: TIN PLATED COPPER
SURFACE FINISH EITHER BRIGHT TIN (99.9% SN)
OR MATTE TIN (95.5% SN, 3.5% AG, 1% CU)
INSULATION & STIFFENER: POLYESTER
F:\DWG\MISC\MKTG\FJH-XX-X-XX.XX-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTE:
1. REPRESENTS A CRITICAL DIMENSION.
2. TO BE MEASURED AT BASE OF EXPOSED LEAD.
3. ENGLISH IS PRIMARY FOR THIS MEASUREMENT.
4. TO BE MEASURED ON BOTH EDGES OF CABLE.
X.X:
0.3 2
X.XX:
0.05
X.XXX:
0.025
DECIMALS ANGLES
TOLERANCES ARE:
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
REVISION V
