Datasheet for part number CA3106E20-4PWB13
Our Catalog Part Number: CA3106E20-4PWB-13
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet Connector with bayonet coupling
Shell Style Plug, straight
Endbell Style
Shielded connector with endbell for shielded braids
and heat shrinkable boots
Gender Pin
Shell Size 20
Contact Arrangement 20-4
Number of contacts 4 contacts size 12
Contact Type Solder Cup
Contact Plating Hard silver
Contacts installed yes
Shielding yes
Insulator Rotation 45°
Contact Rating at +20 °C (68 °F)
(Size 25/12)
41 A
Contact Resistance (Size 25/12) 3 mΩ
Operating Voltage
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Insulator Resistance
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Test Voltage 2500 Vrms
Air and Creepage Paths (Min) 2,8 mm
Ambient Temperature
Standard insulator material -55°/+125°C
(-67/257°F)
Safety Provisions
IP67 and IP68 (1 bar pressure after 12 hrs) acc. to
DIN 40 050
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact (Size 25/12) 1,5 N
Gage
For infos on Gage please see catalog
VG95234, part 1
Coupling Torque Closing: 9 Nm max / Opening: 0,7 Nm min
Contact Retention (Size 25/12) 55 N
Shell Material Aluminium alloy
Shell Plating
Olive drab chromate over cadmium plating
(conductive)
Insulator and Grommet Material CR-Elastomere
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping (Size 25/12) 6,2 mm
General Info
All tests in accordance with VG95319 and/or if
applicable with VG95210
Specifications and dimensions subject to change.
Page 1 of
