FN2410-25-33 Datasheet FN2410H-100-34, FN2410-45-33, FN2412H-16-44 | P1-P3

DATASHEET

Single-Stage Filters FN 2410 and FN 2412

EMC/RFI Filters for Industrial Electronics

Excellent filter performance for applications

with high interference levels

Filters for two-phase supply up to 2x 520 VAC

(P-P) available

Fast and comfortable snap-in installation on

popular TS 35 DIN-rails up to 45 A

Industrial grade terminal blocks for

unsurpassed electrical safety

Performance indicators

Technical specifications

Maximum continuous operating voltage

1x 250 VAC (FN 2410/FN 2412)

2x 520/300 VAC (FN 2410 H/FN 2412 H)

Operating frequency

DC to 400 Hz

Rated currents

8 to 100 A @ 50°C (FN 2410)

8 to 45 A @ 50°C (FN 2412)

High potential test voltage

P –> E 2000 VAC for 2 sec

P –> N 1100 VDC for 2 sec

P –> E 2700 VDC for 2 sec (H types)

P –> P 2250 VDC for 2 sec (H types)

Protection category

IP 20

Overload capability

4x rated current at switch on,

1.5x rated current for 1 minute, once per hour

Temperature range (operation and storage)

-25°C to +100°C (25/100/21)

Flammability corresponding to

UL 94 V-2 or better

Design corresponding to

UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

MTBF @ 50°C/250 V (Mil-HB-217F)

1,200,000 hours

250,000 hours (H types)

Approvals

Features and benefits

FN 2410 filters up to 100 A are designed for

traditional chassis mounting

For extra fast installation, FN 2412 filters up to 45 A

can comfortably be snapped-in on popular TS 35

DIN-rails which are common in most electrical

cabinets

Both FN 2410 and FN 2412 are also avail- able as „H

versions“. These are ideally suitable for an operation

on two phases in a three-phase power network,

handling voltages up to 520 VAC

All filters provide an exceptional conducted

attenuation performance, based on chokes with

high saturation resistance and excellent thermal

behavior. Thus, all filters retain the expected filter

performance even in very noisy applications and

under full load conditions

Touch-safe industrial grade terminal blocks provide

maximum electrical safety and protect humans

from undeliberate contact with life conductors.

They help to fulfill the most demanding installation

standards

Typical applications

Small to medium-sized machines and industrial

equipment

High-end single-phase power supplies

Single-phase variable speed motor drives, inverters

and converters

DIN-rail filter versions are ideal for panel building

and electrical cabinets

Various noisy applications with higher power single-

phase or two-phase supply

Typical electrical schematic

2 EMC/EMI Products Schaffner Group Datasheets 2017

Filter selection table

Filter Rated current Leakage current* Power loss Input/Output Weight

@ 50°C (40°C) @ 250 VAC /50 Hz @ 25°C/50 Hz connections

(@ 120 VAC /60 Hz)

[A] [mA] [W]

[kg]

FN 2410-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.4

FN 2410-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.5

FN 2410-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.6

FN 2410-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.7

FN 2410-45-33 45 (49.3) 2.60 (1.49) 7.4 -33 0.7

FN 2410-60-34 60 (65.7) 2.60 (1.49) 5.5 -34 1.8

FN 2410-80-34 80 (87.6) 2.60 (1.49) 9.9 -34 1.8

FN 2410-100-34 100 (109.5) 2.60 (1.49) 15.4 -34 1.8

FN 2410 H-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.5

FN 2410 H-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.6

FN 2410 H-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.7

FN 2410 H-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.8

FN 2410 H-60-34 60 (65.7) 2.60 (1.49) 5.5 -34 1.9

FN 2410 H-80-34 80 (87.6) 2.60 (1.49) 9.9 -34 1.9

FN 2410 H-100-34 100 (109.5) 2.60 (1.49) 15.4 -34 1.9

FN 2412-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.4

FN 2412-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.6

FN 2412-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.7

FN 2412-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.8

FN 2412-45-33 45 (49.3) 2.60 (1.49) 7.4 -33 0.8

FN 2412 H-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.5

FN 2412 H-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.7

FN 2412 H-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.8

FN 2412 H-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.9

* Maximum leakage under normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level.

Typical filter attenuation

Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym

8 to 45 A types

60 to 100 A types

3 EMC/EMI Products Schaffner Group Datasheets 2017

Mechanical data

FN 2410 (H) FN 2412 (H)

Dimensions

FN 2410

FN 2412

8 A 16 A 25 A 32 A 45 A 60 A 80 A 100 A 8 A 16 A 25 A 32 A 45 A

A 130 130 130 130 130 165 165 165 110 110 110 110 110

B 93 93 93 93 93 115 115 115 93 93 93 93 93

C 62 62 76 76 76 100 100 100 73 73 87 87 87

D 108 108 108 108 108 140 140 140

E 120 120 120 120 120 155 155 155

F 70 70 70 70 70 90 90 90

G 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3

H 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2

I 22 22 25 25 25 39 39 39 22 22 25 25 25

J M6 M6 M6 M6 M6 M8 M8 M8 M6 M6 M6 M6 M6

Rec. torque (Nm) 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 8.0 - 9.0 8.0 - 9.0 8.0 - 9.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0

L 17.5 17.5 31.5 31.5 31.5 39.2 39.2 39.2 28.5 28.5 42.5 42.5 42.5

All dimensions in mm; 1 inch = 25.4 mm

Tolerances according: ISO 2768-m/EN 22768-m

Filter input/output connector cross sections

-33 -34 -44

Solid wire

16 mm

35 mm

10 mm

Flex wire

10 mm

25 mm

6 mm

AWG type wire AWG 6 AWG 2 AWG 8

Recommended torque 1.5-1.8 Nm 4.0-4.5 Nm 1.5-1.8 Nm

Please visit www.schaffner.com

to find more details on filter connectors.

P1-P3 P4-P4

FN2410-25-33

Mfr. #:

Buy FN2410-25-33

Manufacturer:

Description:

AC Power Line Filters Power Line Filters FN2410-25/33

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

FN2410-25-33

FN2410-25-33

Products related to this Datasheet