NLX2G06
www.onsemi.com
2
MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
IN
DC Input Voltage −0.5 to +7.0 V
V
OUT
DC Output Voltage −0.5 to +7.0 V
I
IK
DC Input Diode Current V
IN
< GND −50 mA
I
OK
DC Output Diode Current V
OUT
< GND −50 mA
I
O
DC Output Source/Sink Current ±50 mA
I
CC
DC Supply Current Per Supply Pin ±100 mA
I
GND
DC Ground Current per Ground Pin ±100 mA
T
STG
Storage Temperature Range −65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias 150 °C
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
I
LATCHUP
Latchup Performance Above V
CC
and Below GND at 125°C (Note 5) ±500 mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA/JESD22−A114−A.
3. Tested to EIA/UESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
Positive DC Supply Voltage 1.65 5.5 V
V
IN
Digital Input Voltage 0 5.5 V
V
OUT
Output Voltage 0 5.5 V
T
A
Operating Free−Air Temperature −55 +125 °C
Dt/DV
Input Transition Rise or Fall Rate V
CC
= 2.5 V ± 0.2 V
V
CC
= 3.3 V ± 0.3 V
V
CC
= 5.0 V ± 0.5 V
0
0
0
20
10
5
ns/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
