https://www.phoenixcontact.com/us/products/2859699
07/23/2014Page2/5
Type 2 surge protection plug-VAL-CP-N/PE-350-ST-2859699
Technical data
General
EN 61643-11 2012
IEC test classification II
T2
EN type T2
SPD design Voltage-switching type
Mode of protection N-PE
Mounting type On base element
Color gray/blue
Housing material PBT-FR
Pollution degree 2
Inflammability class according to UL 94 V-0
Type DIN rail module, two-section, divisible
Number of positions 1
Surge protection fault message Optical
Protective circuit
Nominal voltage U
N
240 V AC (TN - only N-PE)
240 V AC (TT - only N-PE)
Nominal frequency f
N
50 Hz (60 Hz)
Maximum continuous voltage U
C
(N-PE)
264 V AC
Residual current I
PE
≤ 1 µA
Nominal discharge current I
n
(8/20) µs (N-PE)
20 kA
Maximum discharge current I
max
(8/20) µs (N-PE)
40 kA
Follow current interrupt rating I
fi
(N-PE)
100 A (264 V AC)
Voltage protection level U
p
(N-PE)
≤ 1.5 kV
Residual voltage U
res
(N-PE) ≤ 0.5 kV (at I
n
)
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.5 kV (at 4 kA)
≤ 0.5 kV (at 2 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs (N-PE) ≤ 1.5 kV
TOV behavior at U
T
(N-PE)
1200 V AC (200 ms / withstand mode)
Response time t
A
(N-PE)
≤ 100 ns
NEMA/UL protective circuit
UL class Type 4 SPD for Type 2 applications
Maximum continuous operating voltage MCOV (N-G) 264 V AC
Mode of protection N-G