Page 4 of 4
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Physical Specifications
Casing material copper
Baseplate material non conductive FR4
Potting material silicone (UL94V-0 rated)
Weight 33 g (1.16oz)
Soldering temperature max. +265°C / 10 sec.
DC/DC Converters
TEN 60N Series 60 Watt
Outline Dimensions
Rev. July 11, 2018
14.5
(0.57)
16.8 (0.66)
max.
Converter
Heat-sink
Thermal pad
Clamp
Note:
Before attaching the heatsink, the product
label on converter has to be removed for
optimal performance.
For volume orders we can supply the
converters with heatsink already mounted.
Please contact us for a relative quotation.
Order code: TEN-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 17 g (0.60oz) without converter
Thermal impedance after assembling: 10.3 K/W
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
2
–Vin (GND) –Vin (GND)
3
Remote On/Off
4
+Vout +Vout
5
–Vout Common
6
TRIM –Vout
Pin-Out
Dimensions in [mm], () = Inch
Pin diameter: 1.0 ±0.1 (0.04 ±0.004)
Pin pitch tolerances: ±0.25 (±0.01)
Case tolerances: ±0.5 (±0.02)
Dimensions in mm, () = Inch
Heat-Sink (Option)
10.2
5.6
50.8
(2.0)
(0.4)
(0.22)
Bottom View
1
4
3
2
6
45.72
5
(1.8)
2.54
(0.1)
5.08
(0.2)
10.16
(0.4)
10.16
(0.4)
20.32
(0.8)
25.4
(1.0)
2.54
(0.1)
2.54
(0.1)
