OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HLMP-NG07

P1-P3P4-P6P7-P9P10-P11
Description
This family of 3 mm LED Lamps is capable of withstand-
ing automatic insertion and wave soldering processes.
Designed with a thick epoxy ange and soft leadframe
material, it is ideal for clinch and cut operations.
Applications
• General purpose
• High volume manufacturing
Device Selection Guide
High Brightness Lamps
Part Number Color Package lens Luminous Intensity,
Min. Iv @ 20 mA
Viewing Angle,
2θ
1/2
Package Drawing
HLMP-NG05 AlInGaP Red Micro-tinted 90.2
45°
A
HLMP-NG07 AlInGaP Red Micro-tinted 90.2
60°
B
HLMP-NL06 AlInGaP Amber Micro-tinted 96.2
60°
B
High Eciency Lamps
Part Number Color Package lens Luminous Intensity,
Min. Iv @ 10 mA
Viewing Angle,
2θ
1/2
Package Drawing
HLMP-N305 GaP Yellow Tinted 14.7
45°
A
Note:
1. 2θ
1
/
2
is the o axis angle where the luminous intensity is
1
/
2
the on axis intensity.
HLMP-N305, HLMP-NG0x, HLMP-NL06
T-1 (3 mm) Auto Insertable LED Lamps
Data Sheet
Features
• T-1 (3 mm) auto-insertable package
• High brightness light output
• Tinted non-diused lens
• Wide viewing angle
• Available colors: Red, Amber and Yellow
• Available with straight or formed lead tape and reel
options
2
2.0 (0.08) REF.
0.4 ± 0.2
(0.01
± 0.01)
2.5 ± 0.3
(0.10
± 0.01)
0.45
± 0.10
(0.02
± 0.007)
0.4 ± 0.2
(0.02
± 0.01)
0.4
+ 0.1
0
(0.2
+ 0.00
- 0.00
)
3.4 0.2
(0.13 0.01)
CATHODE MARKS
0.65 (0.03) MAX.
3.1 ± 0.2
(0.12
± 0.01)
4.4 ± 0.3
(0.17
± 0.01)
3.5
± 0.3
(0.14
± 0.01)
5.9
± 0.5
(0.23
± 0.02)
23.0
(0.91)
1.0 ± 0.5
(0.04
± 0.02)
SEATING PLANE
2.0
0.8 MAX. EPOXY MENISCUS
2.54 ± 0.3
0.44 ± 0.2
0.4
+ 0.1
– 0
3.60
CATHODE FLAT
0.65 MAX.
3.10 ± 0.203.80 ± 0.30
3.50
± 0.30
CATHODE LEAD
5.70
± 0.5
23.0 MIN.
1.0 MIN.
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. LEADS ARE MILD STEEL. SOLDER COATED.
3. EPOXY MENISCUS OF 0.8 mm (0.03 in.) MAXIMUM MAY EXTEND TO THE LEADS.
Package Dimensions
Package Drawing “A”
Package Drawing “B”
Notes:
1. All dimensions are in millimeters (inches).
2. Leads are mild steel with tin plating.
3. Epoxy meniscus of 0.8 mm (0.03 in.) Maximum may extend to the leads.
4. For PCB hole recommendations, see the Precautions section.
Part Numbering System
HLMP - N x xx # xxx
Mechanical Option
002: Tape & Reel, Straight Leads
Viewing Angle Options
05: 45 Degree
06, 07: 60 Degree
Color Options
3: GaP Yellow
G: AlInGaP Red
L: AlInGaP Amber
3
Absolute Maximum Ratings at T
A
= 25 ºC
AlInGaP
Parameter Yellow Amber & Red Units
DC Forward Current
[1]
20 30
[2,3]
mA
Reverse Voltage (Ir = 100 µA) 5 V
Junction Temperature, T
jmax
110 °C
Storage Temperature Range -40 to +85 °C
Operating Temperature Range -20 to +85 -40 to +85 °C
Notes:
1. See Figure 4 for maximum current derating vs. ambient temperature.
2. Suggested minimum DC current: 10 mA.
3. Maximum Peak Pulsed Forward Current: 50 mA, 30 mA average.
Electrical Characteristics at T
A
= 25ºC
Capacitance Thermal Speed of Response
C (pF) , Resistance τ
s
(ns)
Forward Voltage Vf (Volts) Vf = 0, f = 1 MHz Rθ
J-PIN
Time Constant e
-t
/τ
s
Part Number Typ. Max. If (mA) Typ. (°C/W) Typ.
HLMP-N305 2.00 2.6 10 15 290 90
HLMP-NL06
[1]
2.02 2.4 20 40 240 20
HLMP-NG0x
[1]
1.90 2.4 20 40 240 20
Note:
1. Please contact your Avago Sales Representative about operating currents below 10 mA.
Optical Characteristics at T
A
= 25 ºC
Typ. Dominant Typ. Spectral Luminous
Luminous Intensity
[1]
Typ. Peak Wavelength
[2]
Half Width Ecacy
[3]
Part Number Min. (mcd) I
f
(mA) Wavelength (nm) (nm) (nm) (lm/W)
HLMP-NG05 90.2 20 635 626 17 150
HLMP-NG07 90.2 20 635 626 17 150
HLMP-NL06 96.2 20 592 590 17 480
HLMP-N305 14.7 10 583 585 36 500
Notes:
1. The luminous intensity, lv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. The dominant wavelength, l
d
, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. The radiant intensity, le, in watts per steradian, may be found from the equation le = lv/h
v
, where lv is the luminous intensity in candelas and h
v
is the luminous ecacy in lumens/watt.
P1-P3P4-P6P7-P9P10-P11

HLMP-NG07

Mfr. #:
Buy HLMP-NG07
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - Through Hole Red Non-diffused 645nm 90.2mcd
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet