Specification Control Drawing
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
Title:
Altera
™
MT2000
Modified, Medical Grade, Polyolefin,
Heat - Shrinkable Tubing
TE Connectivity reserves the right to amend this drawing at any
time. Users should evaluate the suitability of the product for their
application
Document No :
MT2000
Cage Code:
06090
Scale:
None
Size:
A
Rev. Date:
11MAY11
Rev.:
B1
Sheet:
1 of 2
Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
Altera
™
MT2000
Modified, Medical Grade, Polyolefin,
Heat - Shrinkable Tubing
This specification covers the requirements for one type of single wall, electrical insulating, extruded
tubing whose diameter will reduce to a predetermined size upon application of heat in excess of 140°C
(284°F).
The tubing is fabricated from modified polyolefin crosslinked by irradiation. It shall be homogenous and
essentially free from flaws, defects, pinholes, seams, cracks or inclusions.
The tubing is fabricated from materials which meet the requirements of U.S. Pharmacopeia Class VI
Plastics. Color shall be black or clear unless otherwise specified.
Table 1: Dimensions
As Supplied
Recovered
Size
Inside Diameter
Minimum (D)
Inside Diameter
Maximum (d)
Wall Thickness(Inches, Millimeters)
(W)
mm.
in.
mm.
in. Minimum Maximum Nominal
1mm 1.0 .040 0.45 .018 .008 0.20 .012 0.30 .010 .25
2mm 2.0 .080 0.80 .032 .008 0.20 .012 0.30 .010 .25
3mm 3.0 .120 1.20 .048 .008 0.20 .012 0.30 .010 .25
6mm 6.0 .240 2.4 .096 .008 0.20 .012 0.30 .010 .25
10mm 10.0 .400 4.0 .160 .012 0.30 .016 0.41 .014 .36
