94SVPD
www.vishay.com
Vishay OS-CON
Revision: 03-Aug-12
1
Document Number: 90022
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Aluminum Solid Capacitors with Conductive Polymer
FEATURES
• New OS-CON 94SVPD series provides
improved characteristics with up to 125 °C
temperature capability and 35 V maximum
voltage rating in a SMD package
• Improved damp heat (steady state) 85 °C x 85 %
RH performance
• Suitable for use in smoothing circuits of vehicle-mounted
equipment, industrial equipment, etc.
• This product can support lead (Pb)-free reflow
(2)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Notes
(1)
If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage treatment: The rated voltage is applied (10 V to
35 V) for 120 min at 125 ºC.
(2)
Refer to “Recommended Reflow Profile” for maximum temperatures.
QUICK REFERENCE DATA
DESCRIPTION CONDITIONS VALUE
Operating temperature range - - 55 °C to + 125 °C
Capacitance tolerance 120 Hz M: ± 20 %
Tangent of loss angle (tan ) 120 Hz values in Electrical Data and Ordering Information table
Leakage current (μA/2 min) (or less)
(1)
After 2 min values in Electrical Data and Ordering Information table
ESR - values in Electrical Data and Ordering Information table
Characteristics of impedance ratio
at high and low temperature
100 kHz, + 20 °C
- 55 °C Z/Z
20 °C
0.75 to 1.25
+ 125 °C Z/Z
20 °C
0.75 to 1.0
Endurance
+ 125 °C, 2000 h
rated voltage applied
C/C Within ± 20 %
tan 2 x or < than an initial standard
ESR 2 x or < than an initial standard
Leakage current Below an initial standard
Damp heat (steady state)
+ 85 °C, 85 % to 90 % RH,
1000 h
rated voltage applied
C/C Within ± 20 %
tan 2 x or < than an initial standard
ESR 2 x or < than an initial standard
Leakage current Below an initial standard
Solder heat resistance
(2)
(VPS)
(230 °C x 75 s)
C/C Within ± 10 %
tan 1.3 x or < than an initial standard
ESR 1.3 x or < than an initial standard
Leakage current
Below an initial standard
(after voltage procesing)
DIMENSIONS in millimeters
SIZE CODE Ø D ± 0.5 L + 0.1/- 0.4 W ± 0.2 H ± 0.2 C ± 0.2 R P ± 0.2
C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1
E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2
F8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6
E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2
F12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6
Ø D
L
P
R
C
W
H
003
SVPD
47
35
Series
Rated capacitance
Rated voltage
C6 size is PD
E7, F8, E12, F12
size is SVPD
Polarity marking (Cathode)
Case No.
0.2 max.
(+)
