OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SE5004L-R

P1-P3P4-P6P7-P9
DATA SHEET
SE5004L: 5 GHz, 26dBm Power Amplifier with Power Detector
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202393B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 23, 2012 1
Applications
DSSS 5 GHz WLAN (IEEE802.11a)
DSSS 5 GHz WLAN (IEEE802.11n)
Access Points, PCMCIA, PC cards
Features
High output power amplifier
- 26dBm at 5V
External Analog Reference Voltage (V
REF
) for
maximum flexibility
Buffered, temperature compensated power
detector
3% EVM, @26dBm, 64 QAM, 54 Mbps
32 dB Gain
Lead Free, RoHS compliant, halogen free MSL3
package
20 pin 4 mm x 4 mm x 0.9 mm QFN
Ordering Information
Part Number Package Remark
SE5004L
20 Pin QFN
Samples
SE5004L-R
20 Pin QFN
Tape and Reel
SE5004L-EK1
Evaluation Kit
Standard
Product Description
The SE5004L is a 5GHz power amplifier offering high
linear power for wireless LAN applications. The
SE5004L incorporates a power detector for closed
loop monitoring and control of the output power.
The SE5004L offers high integration for a simplified
design, providing quicker time to market and higher
application board production yield. The device
integrates the input match, the inter-stage match, the
output match, the power detector with 15dB of
dynamic range and a 3.8GHz notch filter. Only 6
external decoupling capacitors are required to
complete the design.
For wireless LAN applications, the device meets the
requirements of IEEE802.11a & 802.11n, and delivers
approximately 26dBm of linear output power at 5V.
The SE5004L integrates temperature compensated
bias voltage generators. A 2.85V reference voltage
on VREF is all that is required to enable or disable the
power amplifier.
Functional Block Diagram
RFIN and RFOUT include DC shunt to Ground. External blocking capacitors are recommended.
Figure 1: Functional Block Diagram
DATA SHEET
SE5004L: 5 GHz, 26dBm Power Amplifier with Power Detector
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202393B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 23, 2012 2
Pin Out Diagram
Figure 2: SE5004L Pin Out (Top View Through Package)
Pin Out Description
Pin No. Name Description
1 NU Pin is not used, and is open circuit in the package
2 GND Ground
3 RFin Power Amplifier RF input, DC block required
4 GND Ground
5 V
REF
Reference Voltage
6 SP1 Port for optional capacitor to improve dynamic EVM
7 SP2 Port for optional capacitor to improve dynamic EVM
8 VCC2 Second Stage Supply Voltage
9 VCC3 Third Stage Supply Voltage
10 DET Analog Power Detector Output
11,12 GND Ground
13 RF OUT Power Amplifier RF Output
14-17 GND Ground
18 VCC3 Third Stage Supply Voltage
19 VCC2 Second Stage Supply Voltage
20 VCC1 First Stage Supply Voltage
1
2
3
4
5
15
14
13
12
11
16
6 7 8 9 10
DET
VCC3
VCC2
SP2
SP1
GND
GND
VCC3
VCC2
VCC1
NU
GND
RF IN
GND
VREF
GND
GND
RF OUT
GND
GND
DATA SHEET
SE5004L: 5 GHz, 26dBm Power Amplifier with Power Detector
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202393B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 23, 2012 3
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings for a long period of time may
cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the
recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this
device should be at ESD protected workstations.
Symbol Definition Min. Max. Unit
VCC
Supply Voltage on pins VCC3 -0.3 +6
V
Supply Voltage on pins VCC1, VCC2 -0.3 VCC3
V
REF
Power Amplifier Enable and Reference Voltage -0.3 3.6 V
RFIN RF Input Power, RFout into 50Ω match, T
CASE_MAX
= 85C - 6 dBm
TSTG Storage Temperature Range -40 160 °C
Tj Maximum Junction Temperature - 160 °C
ESD
HBM
JEDEC JESD22-A114 all pins - 500 V
Recommended Operating Conditions
Symbol Parameter Min. Max. Unit
VCC
Supply Voltage VCC3 3.0 5.5
V
Supply Voltage VCC1, VCC2 3.0 VCC3
T
CASE_MAX
Maximum Case Temperature -40 85 °C
VREF Reference Voltage 2.8 2.9 V
DC Electrical Characteristics
Conditions: VCC
= 5.0V, V
REF
= 2.85 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5004L-EK1 evaluation
board, unless otherwise noted.
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC-802.11a Supply Current P
OUT
= 26 dBm, 54 Mbps, 64 QAM - 600 800 mA
IQC Quiescent Current No RF - 300 - mA
IOFF Supply Current V
REF
= 0 V, No RF - 0.5 10 μA
IEN
Bias Control
Current
V
REF
= V
REF
H
Internal 2KΩ pull down resistor
- 10 - mA
V
REF
H
Reference Voltage
Enabled
- 2.80 2.85 2.9 V
V
REF
L
Reference Voltage
Disabled
- 0 - 0.5 V
P1-P3P4-P6P7-P9

SE5004L-R

Mfr. #:
Buy SE5004L-R
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Amplifier 5GHz 26dBm Gain 32dB
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet