IS31FL3193D
Integrated Silicon Solution, Inc. – www.issi.com 1
Rev. A, 05/20/2015
3-CHANNEL FUN LED DRIVER
May 2015
GENERAL DESCRIPTION
IS31FL3193D is a 3-channel fun LED driver which
features two-dimensional auto breathing mode. It has
One Shot Programming mode and PWM Control mode
for RGB lighting effects. The maximum output current
can be adjusted in 5 levels (5mA~42mA).
In PWM Control mode, the PWM duty cycle of each
output can be independently programmed and
controlled in 256 steps to simplify color mixing. In One
Shot Programming mode, the timing characteristics for
output current - current rising, holding, falling and off
time, can be adjusted individually so that each output
can independently maintain a pre-established pattern
achieving mixing color breathing or a single color
breathing without requiring any additional interface
activity, thus saving valuable system resources.
IS31FL3193D is available in WLCSP-8
(1.6mm×1.0mm×0.46mm) package. It operates from
2.7V to 5.5V over the temperature range of -40°C to
+85°C.
FEATURES
One group RGB, single color LED breathing
system-free pre-established pattern
3 independently controlled automatic and
semiautomatic breathing system-free
pre-established pattern
I2C interface, automatic address increment
function
3 independently controlled outputs of 256 PWM
steps
2.7V to 5.5V supply voltage
5 levels programmable output current
Over-temperature protection
Operating temperature T
A
= −40°C ~ +85°C
WLCSP-8 (1.6mm×1.0mm×0.46mm) package
APPLICATIONS
Mobile phones and other hand-held devices for
LED display
LED in home appliances
TYPICAL APPLICATION CIRCUIT
Figure 1 Typical Application Circuit
Note: The IC should be placed far away from the mobile antenna in order to prevent the EMI.
